This code list allows details of authorisations given by reporting countries to change operating conditions under Article 51 of 2010/75/EU.
Article 50(1): This value should be selected if the derogation relates to Article 50(1) which requires that the total organic carbon content of slag and bottom ashes is less than 3 % or their loss on ignition is less than 5 % of the dry weight of the material. Conditions different from those laid down in Article 50(1), (2) and (3) and, as regards the temperature, paragraph 4 of that Article and specified in the permit for certain categories of waste or for certain thermal processes, may be authorised by the competent authority provided the other requirements of this Chapter are met. Member States may lay down rules governing these authorisations.
Article 50(2): This value should be selected if the derogation relates to Article 50(2) which specifies the minimum requirement residence time and temperature of the waste gases from the combustion process. For waste incineration plants, the change of the operating conditions shall not cause more residues or residues with a higher content of organic polluting substances compared to those residues which could be expected under the conditions laid down in Article 50(1), (2) and (3).
Article 50(3): This value should be selected if the derogation relates to Article 50(3) which requires each combustion chamber to be equipped with at least one auxiliary burner. Emissions of total organic carbon and carbon monoxide from waste co-incineration plants, authorised to change operating conditions according to paragraph 1 shall also comply with the emission limit values set out in Part 3 of Annex VI.
This indicates situations where a member state has allowed a derogation in line with the requirements of Article 51(1) of Directive 2010/75/EU. Conditions different from those laid down in Article 50(1), (2) and (3) and, as regards the temperature, paragraph 4 of that Article and specified in the permit for certain categories of waste or for certain thermal processes, may be authorised by the competent authority provided the other requirements of this Chapter are met. Member States may lay down rules governing these authorisations.
This code list option should be chosen where the derogations offered under both Article 50(1) and 50(2) are applied.
This code list option should be chosen where the derogations offered under both Article 50(1) and 50(3) are applied.
This code list option should be chosen where the derogations offered under both Article 50(2) and 50(3) are applied.
Article 50(1), Article 50(2) and Article 50(3) apply.
This code list option should be chosen where the derogations offered under Article 50(1), Article 50(2) and Article 50(3) are applied.
Baseline report not prepared and submitted to the competent authority.
Baeline report not required as the activity does not involve the use, production or release of relevant hazardous substances and/or does not have the possibility of soil and groundwater contamination at the site of the installation.
Baseline report prepared and submitted to the competent authority.
Production of Chlor-alkali - Cl2 - BAT13-I
4, Chemical industry: 4,2 Production of inorganic chemicals, such as: (a) gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride; (c) bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide; Reducing free chlorine to water. The BAT-AEL emission level is 0,05 - 0,2 mg/l.
Production of Chlor-alkali - Cl2 - BAT8-I
4, Chemical industry: 4,2 Production of inorganic chemicals, such as: (a) gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride; (c) bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide; Chlorine absorption unit; features (i)-(xv) (see list); Reducing chlorine and chlorine dioxide emissions to air. The BAT-AEL emission level is 0,2 - 1 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - CO - BAT48
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; PFRK, OSK, LRK, PRK; Reducing carbon monoxide (CO) emissions to air. The BAT-AEL emission level is < 500 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - CO - BAT63
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (c) production of magnesium oxide in kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(c) (see table); Reducing carbon monoxide (CO) emissions to air. The BAT-AEL emission level is < 50 - 1000 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT16
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Dry flue-gas cleaning with a filter (usually fabric filter); Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT17
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; ESPs, fabric filters, hybrid filters; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT18
Production of Cement, Lime and Magnesium Oxide - Dust - BAT42-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Fabric filter; Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT42-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Wet scrubber; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT43-I
Production of Cement, Lime and Magnesium Oxide - Dust - BAT43-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; ESP or other filters; Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT59
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (c) production of magnesium oxide in kilns with a production capacity exceeding 50�tonnes per day; Fabric filters, centrifugal separators/ cyclones, wet dust separators; Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Dust - BAT60
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (c) production of magnesium oxide in kilns with a production capacity exceeding 50�tonnes per day; ESPs, fabric filters, centrifugal separators / cyclones, wet dust separators; Reducing dust emissions to air. The BAT-AEL emission level is < 20 - 35 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - HCl - BAT25
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Primary techniques (a)-(b) (see table); Reducing hydrogen chloride (HCl) emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - HCl - BAT51-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Primary techniques (a)-(b) (see table), when using waste; Reducing hydrogen chloride (HCl) emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - HF - BAT26
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Primary techniques (a)-(b) (see table); Reducing hydrogen fluoride (HF) emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - HF - BAT51-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Primary techniques (a)-(b) (see table), when using waste; Reducing hydrogen fluoride (HF) emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Hg - BAT28-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(c) (see table); Reducing mercury emissions to air. The BAT-AEL emission level is < 0,05 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Hg - BAT53-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(d) (see table), when using wastes; Reducing metals emissions to air. The BAT-AEL emission level is < 0,05 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Metals - BAT28-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(c) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,05 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Metals - BAT28-III
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(c) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,5 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - Metals - BAT53-II
Production of Cement, Lime and Magnesium Oxide - Metals - BAT53-III
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(d) (see table), when using wastes; Reducing metals emissions to air. The BAT-AEL emission level is < 0,5 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NH3 - BAT20
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; SNCR; techniques (a)-(c) (see table); Reducing ammonia slip emissions to air. The BAT-AEL emission level is < 30 - 50 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NH3 - BAT46
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; SNCR; Reducing ammonia slip emissions to air. The BAT-AEL emission level is < 30 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NO2 - BAT19-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Preheater kilns; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 200 - 450 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NO2 - BAT19-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Lepol and long rotary kilns; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 400 - 800 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NO2 - BAT45-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; PFRK, ASK, MFSK, OSK; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 - 350 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NO2 - BAT45-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; LRK, PRK; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 200 - 500 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - NO2 - BAT62
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (c) production of magnesium oxide in kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(b) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 1500 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - PCDD.F - BAT27
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Techniques (a)-(f) (see table); Reducing PCDD/F emissions to air. The BAT-AEL emission level is < 0,05 - 0,1 ng/Nm3.
Production of Cement, Lime and Magnesium Oxide - PCDD.F - BAT52
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; Primary techniques (a)-(c) (see table); Reducing PCDD/F emissions to air. The BAT-AEL emission level is < 0,05 - 0,1 ng/Nm3.
Production of Cement, Lime and Magnesium Oxide - SO2 - BAT21
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (a) production of cement clinker in rotary kilns with a production capacity exceeding 500�tonnes per day or in other kilns with a production capacity exceeding 50�tonnes per day; Absorbent addition, wet scrubber; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 50 - 400 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - SO2 - BAT47-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; PFRK, ASK, MFSK, OSK, PRK; Reducing SOX emissions to air. The BAT-AEL emission level is < 50 - 200 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - SO2 - BAT47-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; LRK; Reducing SOX emissions to air. The BAT-AEL emission level is < 50 - 400 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - SO2 - BAT65
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (c) production of magnesium oxide in kilns with a production capacity exceeding 50�tonnes per day; Primary and secondary techniques (a)-(d) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 50 - 400 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - TOC - BAT50-I
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; LRK, PRK; Reducing total organic carbon (TOC) emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Production of Cement, Lime and Magnesium Oxide - TOC - BAT50-II
3, Mineral industry: 3,1 Production of cement, lime and magnesium oxide: (b) production of lime in kilns with a production capacity exceeding 50�tonnes per day; ASK, MFSK, PFRK; Reducing total organic carbon (TOC) emissions to air. The BAT-AEL emission level is < 30 mg/Nm3.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - AOX - BAT10-XIII
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing adsorbable organically bound halogens (AOX) to water. The BAT-AEL emission level is 0,2 - 1 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - AOX - BAT10-XIV
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing adsorbable organically bound halogens (AOX) to water. The BAT-AEL emission level is 0,2 - 1 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - COD - BAT10-III
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 30 - 100 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - COD - BAT10-IV
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 30 - 100 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Cr - BAT10-XV
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing chromium to water. The BAT-AEL emission level is 5 - 25 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Cr - BAT10-XVI
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing chromium to water. The BAT-AEL emission level is 5 - 25 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Cu - BAT10-XVII
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing copper to water. The BAT-AEL emission level is 5 - 50 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Cu - BAT10-XVIII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing copper to water. The BAT-AEL emission level is 5 - 50 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - InorgN - BAT10-IX
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing total inorganic nitrogen (N inorg) to water. The BAT-AEL emission level is 5 - 20 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - InorgN - BAT10-X
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing total inorganic nitrogen (N inorg) to water. The BAT-AEL emission level is 5 - 20 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Ni - BAT10-XIX
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing nickel to water. The BAT-AEL emission level is 5 - 50 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Ni - BAT10-XX
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing nickel to water. The BAT-AEL emission level is 5 - 50 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TN - BAT10-VII
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing total nitrogen (TN) to water. The BAT-AEL emission level is 5 - 25 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TN - BAT10-VIII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing total nitrogen (TN) to water. The BAT-AEL emission level is 5 - 25 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TOC - BAT10-I
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing total organic carbon (TOC) to water. The BAT-AEL emission level is < 10 - 33 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TOC - BAT10-II
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing total organic carbon (TOC) to water. The BAT-AEL emission level is < 10 - 33 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TP - BAT10-XI
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing total phosphorus (TP) to water. The BAT-AEL emission level is 0,5 - 3 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TP - BAT10-XII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing total phosphorus (TP) to water. The BAT-AEL emission level is 0,5 - 3 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TSS - BAT10-V
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 5 - 35 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - TSS - BAT10-VI
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 5 - 35 mg/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Zn - BAT10-XXI
4, Chemical industry: 4.1, Production of organic chemicals; 4.2, Production of inorganic chemicals; 4.3, Production of phosphorous-, nitrogen- or potassium-based fertilisers; 4.4, Production of plant protection products or of biocides; 4.5, Production of pharmaceutical products including intermediates; 4.6. Production of explosives. Reducing zinc to water. The BAT-AEL emission level is 20 - 300 ?g/l.
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector - Zn - BAT10-XXII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4. of Annex I Reducing zinc to water. The BAT-AEL emission level is 20 - 300 ?g/l.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing amines emissions to air. The BAT-AEL emission level is < 3 mg/Nm3.
Manufacture of Glass - Amines - BAT63-XI
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing amines emissions to air. The BAT-AEL emission level is < 2 mg/Nm3.
Manufacture of Glass - Amines - BAT63-XVIII
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing amines emissions to air. The BAT-AEL emission level is < 0,01 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing arsenic to water. The BAT-AEL emission level is < 0,3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing boron to water. The BAT-AEL emission level is < 1 - 3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing barium to water. The BAT-AEL emission level is < 3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing total volatile organic compounds emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total volatile organic compounds emissions to air. The BAT-AEL emission level is 10 - 30 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total volatile organic compounds emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total volatile organic compounds emissions to air. The BAT-AEL emission level is < 0,065 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing volatile organic compounds emissions to air. The BAT-AEL emission level is 10 - 20 mg/Nm3.
Manufacture of Glass - C6H6O - BAT13-XIX
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing phenol to water. The BAT-AEL emission level is < 1 mg/l.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing phenol emissions to air. The BAT-AEL emission level is < 5 - 10 mg/Nm3.
Manufacture of Glass - C6H6O - BAT63-VIII
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing phenol emissions to air. The BAT-AEL emission level is < 2 - 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing phenol emissions to air. The BAT-AEL emission level is < 0,03 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 2 - 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 0,03 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (see table); Reducing carbon monoxide (CO) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 5 - 130 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing cadmium to water. The BAT-AEL emission level is < 0,05 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing chromium to water. The BAT-AEL emission level is < 0,3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing copper to water. The BAT-AEL emission level is < 0,3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Flue-gas cleaning system such as electrostatic precipitator or bag filter (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Flue-gas cleaning system such as electrostatic precipitator or bag filter (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 0,015 - 0,06 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electrostatic precipitator or bag filter system; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electrostatic precipitator or bag filter system; Reducing dust emissions to air. The BAT-AEL emission level is < 0,025 - 0,05 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 15 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 0,045 - 0,09 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 5 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(v) (see table) (???); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(v) and batch formulations with significant amounts of dangerous substances (EC No 1272/2008) (?); Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(v) (see table) (???); Reducing dust emissions to air. The BAT-AEL emission level is < 0,03 - 0,06 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(v) and batch formulations with significant amounts of dangerous substances (EC No 1272/2008) (?); Reducing dust emissions to air. The BAT-AEL emission level is < 0,003 - 0,03 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table) and batch formulations with significant amounts of dangerous substances (EC No 1272/2008) (?); Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 0,03 - 0,13 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table) and batch formulations with significant amounts of dangerous substances (EC No 1272/2008) (?); Reducing dust emissions to air. The BAT-AEL emission level is < 0,003 - 0,065 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 1 - 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Electrostatic precipitator or bag filter system; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Electrostatic precipitator or bag filter system; Reducing dust emissions to air. The BAT-AEL emission level is < 0,02 - 0,05 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Flue-gas cleaning by bag filter system (?); Reducing dust emissions to air. The BAT-AEL emission level is < 5 - 20 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 1 - 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Electrostatic precipitator or bag filter system; Reducing dust emissions to air. The BAT-AEL emission level is < 0,05 - 0,15 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 5 - 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing fluorides to water. The BAT-AEL emission level is < 6 mg/l.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Waste gas incineration system to oxidise hydrogen sulphide to SO2; Reducing hydrogen sulphide emissions to air. The BAT-AEL emission level is < 2 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Waste gas incineration system to oxidise hydrogen sulphide to SO2; Reducing hydrogen sulphide emissions to air. The BAT-AEL emission level is < 0,005 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,02 - 0,03 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 30 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 - 25 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,025 - 0,0625 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,05 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,03 - 0,06 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,03 - 0,05 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for glass wool; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 5 - 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for stone wool; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 - 30 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for glass wool; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,01 - 0,02 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for stone wool; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,025 - 0,075 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Raw materials selection for batch formulation with low content of chlorine and fluorine; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is < 0,05 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is 0,001 - 0,008 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 - 4 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,0025 - 0,01 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 5 - 15 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,02 - 0,07 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,003 - 0,015 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,003 - 0,04 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for all products; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); for all products; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,002 - 0,013 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Raw materials selection for batch formulation with low content of chlorine and fluorine; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 0,03 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,2 - 1 mg/Nm3.
Manufacture of Glass - Metals - BAT21-II
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
Manufacture of Glass - Metals - BAT21-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0003 - 0,0015 kg/t.
Manufacture of Glass - Metals - BAT21-IV
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0015 - 0,0075 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,2 - 1 mg/Nm3.
Manufacture of Glass - Metals - BAT29-II
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
Manufacture of Glass - Metals - BAT29-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0005 - 0,0025 kg/t.
Manufacture of Glass - Metals - BAT29-IV
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0025 - 0,0125 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Manufacture of Glass - Metals - BAT31-VI
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
Manufacture of Glass - Metals - BAT36-II
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 - 3 mg/Nm3.
Manufacture of Glass - Metals - BAT36-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0009 - 0,0045 kg/t.
Manufacture of Glass - Metals - BAT36-IV
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0045 - 0,0135 kg/t.
Manufacture of Glass - Metals - BAT43-II
Manufacture of Glass - Metals - BAT43-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0006 - 0,003 kg/t.
Manufacture of Glass - Metals - BAT43-IV
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,003 - 0,015 kg/t.
Manufacture of Glass - Metals - BAT46-II
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Manufacture of Glass - Metals - BAT46-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 - 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,1 - 1 mg/Nm3.
Manufacture of Glass - Metals - BAT53-II
Manufacture of Glass - Metals - BAT53-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0003 - 0,003 kg/t.
Manufacture of Glass - Metals - BAT53-IV
Manufacture of Glass - Metals - BAT54-II
Manufacture of Glass - Metals - BAT54-III
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,2 - 1 mg/Nm3.
Manufacture of Glass - Metals - BAT62-II
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 - 2 mg/Nm3.
Manufacture of Glass - Metals - BAT62-III
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0004 - 0,0025 kg/t.
Manufacture of Glass - Metals - BAT62-IV
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,002 - 0,005 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Manufacture of Glass - Metals - BAT69-II
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(ii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Manufacture of Glass - Metals - BAT75-II
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
Manufacture of Glass - Metals - BAT75-III
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,0075 kg/t.
Manufacture of Glass - Metals - BAT75-IV
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing metals emissions to air. The BAT-AEL emission level is < 0,037 kg/t.
Manufacture of Glass - Metals - BAT76-II
Manufacture of Glass - Metals - BAT76-III
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; SCR or SNCR; Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is < 5 - 30 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing ammonia emissions to air. The BAT-AEL emission level is < 30 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing ammonia emissions to air. The BAT-AEL emission level is 30 - 60 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing ammonia emissions to air. The BAT-AEL emission level is < 20 - 60 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing ammonia emissions to air. The BAT-AEL emission level is < 0,4 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing ammonia to water. The BAT-AEL emission level is < 10 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i), special furnace design (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 500 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Electric melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i), special furnace design (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 0,75 - 1,2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Electric melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Oxy-fuel melting (iv); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 - 0,8 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques (see table BAT 17): Combustion modifications (i), special furnace designs (ii) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 500 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques (see table BAT 17): Electric melting (iii) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques (see table BAT 17) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques (see table BAT 17): Combustion modifications (i), special furnace designs (ii) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 0,75 - 1,2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary techniques (see table) in cases of short campaigns or melting furnaces with a capacity < 100 t/d; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques (see table BAT 17): Electric melting (iii) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques (see table BAT 17): Oxy-fuel melting (iv) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 - 0,8 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques (see table BAT 17) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary techniques (see table) in cases of short campaigns or melting furnaces with a capacity < 100 t/d; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i), Fenix process (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 700 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 400 - 700 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i), Fenix process (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1,75 - 2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Oxy-fuel melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1,25 - 2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1 - 1,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques (see table BAT 25) and minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 400 - 700 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques (see table BAT 25) and minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1 - 1,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary techniques (see table) and production of special glasses in a limited number of short campaigns; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1200 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary techniques (see table) and production of special glasses in a limited number of short campaigns; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 600 - 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 2,7 - 4,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Oxy-fuel melting (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 - 1,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i), special furnace design (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i), special furnace design (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1,25 - 2,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Oxy-fuel melting (iv); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 - 1,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i), special furnace designs (ii) (see table BAT 39) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 1500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting (iii) (see table BAT 39) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Combustion modifications (i), special furnace designs (ii) (see table BAT 39) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1,25 - 2,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting (iii) (see table BAT 39) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting in production of special types of soda-lime glasses and other special glasses and for a limited number of short campaigns or for melting furnaces with a capacity < 100 t/d (?); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 8 - 10 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Oxy-fuel melting (iv) (see table BAT 39) combined with minimisation of these (nitrates) raw materials; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 - 1,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Fuel/air conventional furnaces in production of special types of soda-lime glasses and other special glasses and for a limited number of short campaigns or for melting furnaces with a capacity < 100 t/d (?); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 1500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Electric melting in production of special types of soda-lime glasses and other special glasses and for a limited number of short campaigns or for melting furnaces with a capacity < 100 t/d (?); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 300 - 500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Fuel/air conventional furnaces in production of special types of soda-lime glasses and other special glasses and for a limited number of short campaigns or for melting furnaces with a capacity < 100 t/d (?); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1,25 - 3,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 600 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Electric melting (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Combustion modifications (i); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1,5 - 3,2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Electric melting (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,25 - 0,4 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; I. Primary techniques: Oxy-fuel melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 - 3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; II. Secondary techniques; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 - 3 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary or secondary techniques (see table) combined with minimisation of nitrate input; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Primary or secondary techniques (see table) combined with minimisation of nitrate input; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 - 6 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; For glass wool: Fuel/air (i) and electric furnaces (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 200 - 500 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; For stone wool: All types of furnaces; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 400 - 500 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; For glass wool: Fuel/air (i) and electric furnaces (ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,4 - 1 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; For glass wool: Oxy-fuel melting (iii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 0,5 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; For stone wool: All types of furnaces; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 - 1,25 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques (i)-(iii) combined with minimisation of nitrate input; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 - 700 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques (i)-(iii) combined with minimisation of nitrate input; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 - 1,4 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 - 200 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Lubricant burn-off oven with combustion control and/or modifications (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 - 200 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Fuel/air, fuel/oxygen- enriched air combustion, without nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 500 - 1000 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Fuel/air, fuel/oxygen- enriched air combustion, with use of nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 1600 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Oxy-fuel firing, without nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 2,5 - 5 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Oxy-fuel firing, with use of nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 5 - 10 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Fuel/air, fuel/oxygen- enriched air combustion, without nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 2,5 - 7,5 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques: Fuel/air, fuel/oxygen- enriched air combustion, with use of nitrates; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 12 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing nickel to water. The BAT-AEL emission level is < 0,5 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing lead to water. The BAT-AEL emission level is < 0,05 - 0,3 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing lead compounds emissions to air. The BAT-AEL emission level is < 0,5 - 1 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing lead compounds emissions to air. The BAT-AEL emission level is < 0,001 - 0,003 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing lead emissions to air. The BAT-AEL emission level is < 1 - 1,5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 - 500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 500 - 1200 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,3 - 0,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,75 - 1,8 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 100 - 200 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 300 - 500 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is 500 - 1300 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,75 - 1,25 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is 1,25 - 3,25 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 500 - 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,9 - 3,6 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iv) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 2,25 - 4,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 - 300 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 1000 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and electric melting; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,5 - 0,75 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 2,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and electric melting; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,25 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas and/or electric melting; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 30 - 200 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is 500 - 800 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and natural gas and/or electric melting; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,08 - 0,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table), and fuel oil; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is 1,25 - 2 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for glass wool: Gas-fired and electric furnaces; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 50 - 150 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Gas-fired and electric furnaces; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 350 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Cupola furnaces, no briquettes or slag recycling; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 400 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Cupola furnaces, with cement briquettes or slag recycling; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 1400 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for glass wool: Gas-fired and electric furnaces; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,1 - 0,3 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Gas-fired and electric furnaces; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,9 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Cupola furnaces, no briquettes or slag recycling; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 1 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iv) (see table); for stone wool: Cupola furnaces, with cement briquettes or slag recycling; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 3,5 kg/t.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Primary techniques (i)-(ii) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 50 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 50 - 200 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(iii) (see table); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 0,25 - 1,5 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing sulphates to water. The BAT-AEL emission level is < 1000 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing antimony to water. The BAT-AEL emission level is < 0,5 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing selenium compounds emissions to air. The BAT-AEL emission level is 1 - 3 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing selenium compounds emissions to air. The BAT-AEL emission level is 0,0025 - 0,0075 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing selenium compounds emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(ii) (see table); Reducing selenium compounds emissions to air. The BAT-AEL emission level is < 0,003 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing tin to water. The BAT-AEL emission level is < 0,5 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing tin compounds emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing total hydrocarbons to water. The BAT-AEL emission level is < 15 mg/l.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total particulate matter emissions to air. The BAT-AEL emission level is < 20 - 50 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total particulate matter emissions to air. The BAT-AEL emission level is < 5 - 30 mg/Nm3.
3, Mineral industry: 3,4 Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20�tonnes per day; Techniques (i)-(v) (see table); Reducing total particulate matter emissions to air. The BAT-AEL emission level is < 0,2 kg/t.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing total suspended solids to water. The BAT-AEL emission level is < 30 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day; Techniques (i)-(iii) (see table); Reducing titanium compounds emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing zinc to water. The BAT-AEL emission level is < 0,5 mg/l.
3, Mineral industry: 3,3 Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day Reducing pH to water. The BAT-AEL emission level is 6,5 � 9.
Intensive rearing of poultry or pigs - NH3 - BAT30-I
6.� Other activities: 6.6 (c): Intensive rearing of poultry or pigs with more than 750 places for sows - mating and gestating sows; Techniques (a)-(e) (see table incl. footnote) for mating and gestating sows; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,2-2,7 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT30-II
6.� Other activities: 6.6 (c): Intensive rearing of poultry or pigs with more than 750 places for sows - farrowing sows (including piglets) in crates; Techniques (a)-(e) (see table incl. footnote) for farrowing sows (including piglets) in crates; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,4-5,6 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT30-III
6.� Other activities: 6.6 (c): Intensive rearing of poultry or pigs with more than 750 places for sows - weaners; Techniques (a)-(e) (see table incl. footnote) for weaners; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,03-0,53 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT30-IV
6.� Other activities: 6.6 (b): Intensive rearing of poultry or pigs with more than 2 000 places for production pigs (over 30 kg) - fattening pigs; Techniques (a)-(e) (see table incl. footnote) for fattening pigs; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,1-2,6 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT31-I
6.� Other activities: 6.6 (a): Intensive rearing of poultry or pigs with more than 40 000 places for poultry; Techniques (a)-(c) (see table incl. footnote) for fattening pigs for cage systems; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,02-0,08 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT31-II
6.� Other activities: 6.6 (a): Intensive rearing of poultry or pigs with more than 40 000 places for poultry; Techniques (a)-(c) (see table incl. footnote) for fattening pigs for non-cage systems; Reducing ammonia emissions to air. The BAT-AEL emission level is 0,02-0,13 kg NH3/animal place/year.
Intensive rearing of poultry or pigs - NH3 - BAT32
6.� Other activities: 6.6 (a): Intensive rearing of poultry or pigs with more than 40 000 places for poultry; Techniques (a)-(f) (see table incl. footnote); Reducing ammonia emissions to air. The BAT-AEL emission level is 0,01-0,08 kg NH3/animal place/year.
Iron and Steel Production - BOD5 - BAT56-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing biological oxygen demand for 5 days (BOD5) to water. The BAT-AEL emission level is < 20 mg/l.
Iron and Steel Production - CN - BAT56-V
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing cyanide (CN-) to water. The BAT-AEL emission level is < 0,1 mg/l.
Iron and Steel Production - CN - BAT67-V
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing cyanide (CN-) to water. The BAT-AEL emission level is < 0,4 mg/l.
Iron and Steel Production - COD - BAT28-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 100 mg/l.
Iron and Steel Production - COD - BAT39-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 160 mg/l.
Iron and Steel Production - COD - BAT56-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is < 220 mg/l.
Iron and Steel Production - Cr - BAT81-V
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing total chromium to water. The BAT-AEL emission level is < 0,5 mg/l.
Iron and Steel Production - Cr - BAT92-V
Iron and Steel Production - Dust - BAT20-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Bag filter for new and existing plants; Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 15 mg/Nm3.
Iron and Steel Production - Dust - BAT20-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Advanced electrostatic precipitators for existing plants, when bag filters are not applicable; Reducing dust emissions to air. The BAT-AEL emission level is < 20 - 40 mg/Nm3.
Iron and Steel Production - Dust - BAT26-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Iron and Steel Production - Dust - BAT26-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Electrostatic precipitator; Reducing dust emissions to air. The BAT-AEL emission level is < 30 mg/Nm3.
Iron and Steel Production - Dust - BAT33-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Crushing, grinding and drying; Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Iron and Steel Production - Dust - BAT33-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; All other process steps or where all waste gases are treated together; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 15 mg/Nm3.
Iron and Steel Production - Dust - BAT42
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Coal grinding plants, techniques (I.)-(II.) (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Iron and Steel Production - Dust - BAT43
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Using efficient extraction and subsequent dedusting (technique (V.); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Iron and Steel Production - Dust - BAT44-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Coal charging systems with land-based treatment of extracted gases; Reducing dust emissions to air. The BAT-AEL emission level is < 5 g/t.
Iron and Steel Production - Dust - BAT44-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Coal charging systems with land-based treatment of extracted gases; Reducing dust emissions to air. The BAT-AEL emission level is < 50 mg/Nm3.
Iron and Steel Production - Dust - BAT49-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Techniques (I.)-(IV.) (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 20 mg/Nm3.
Iron and Steel Production - Dust - BAT50-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Bag filters; Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Iron and Steel Production - Dust - BAT50-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Other cases; Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Iron and Steel Production - Dust - BAT51-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Coke dry quenching (CDQ); Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Iron and Steel Production - Dust - BAT51-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Emission-minimised conventional wet quenching; Reducing dust emissions to air. The BAT-AEL emission level is < 25 g/t.
Iron and Steel Production - Dust - BAT51-III
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Coke stabilisation quenching (CSQ); Reducing dust emissions to air. The BAT-AEL emission level is < 10 g/t.
Iron and Steel Production - Dust - BAT52
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Techniques (I.)-(II.) (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Iron and Steel Production - Dust - BAT59
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Dust capture and dry dedusting; Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Iron and Steel Production - Dust - BAT61
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT II (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 15 mg/Nm3.
Iron and Steel Production - Dust - BAT64
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Techniques (I)-(II) (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3 .
Iron and Steel Production - Dust - BAT65-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Desulphurised and dedusted surplus coke oven gas, dedusted blast furnace gas, dedusted basic oxygen furnace gas and natural gas; Reducing dust emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Iron and Steel Production - Dust - BAT75-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT III.i (see list); Reducing dust emissions to air. The BAT-AEL emission level is 10 � 30 mg/Nm3 .
Iron and Steel Production - Dust - BAT75-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT III.ii (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 50 mg/Nm3 .
Iron and Steel Production - Dust - BAT76-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT I (see list) for new and existing plants; Reducing dust emissions to air. The BAT-AEL emission level is 10 - 30 mg/Nm3.
Iron and Steel Production - Dust - BAT76-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT II (see list) for existing plants; Reducing dust emissions to air. The BAT-AEL emission level is < 50 mg/Nm3.
Iron and Steel Production - Dust - BAT78-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 15 mg/Nm3.
Iron and Steel Production - Dust - BAT78-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; ESP; Reducing dust emissions to air. The BAT-AEL emission level is < 20 mg/Nm3.
Iron and Steel Production - Dust - BAT78-III
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is < 1 - 10 mg/Nm3.
Iron and Steel Production - Dust - BAT78-IV
Iron and Steel Production - Dust - BAT79
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT I (see list); Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Iron and Steel Production - Dust - BAT88-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Techniques (I.)-(III.) (see list) and dedusting by bag filter; Reducing dust emissions to air. The BAT-AEL emission level is < 5 mg/Nm3.
Iron and Steel Production - Dust - BAT90
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; BAT I; Reducing dust emissions to air. The BAT-AEL emission level is < 10 - 20 mg/Nm3.
Iron and Steel Production - Fe - BAT67-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing iron to water. The BAT-AEL emission level is < 5 mg/l.
Iron and Steel Production - Fe - BAT81-II
Iron and Steel Production - Fe - BAT92-II
Iron and Steel Production - H2S - BAT48-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Technique (I.) (see list); Reducing hydrogen sulphide emissions to air. The BAT-AEL emission level is < 300 � 1 000 mg/Nm3.
Iron and Steel Production - H2S - BAT48-II
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Technique (II.) (see list); Reducing hydrogen sulphide emissions to air. The BAT-AEL emission level is < 10 mg/Nm3 .
Iron and Steel Production - HCl - BAT34-III
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Wet scrubber, semi-dry absorption with a subsequent dedusting system; Reducing hydrogen chloride (HCl) emissions to air. The BAT-AEL emission level is < 1 - 3 mg/Nm3.
Iron and Steel Production - HF - BAT34-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Wet scrubber, semi-dry absorption with a subsequent dedusting system; Reducing hydrogen fluoride (HF) emissions to air. The BAT-AEL emission level is < 1 - 3 mg/Nm3.
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Waste gas treatment with activated carbon or lignite coke injection; Reducing mercury emissions to air. The BAT-AEL emission level is < 0,03 - 0,05 mg/Nm3.
Iron and Steel Production - Hg - BAT88-II
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Techniques (I.)-(III.) (see list) and dedusting by bag filter; Reducing mercury emissions to air. The BAT-AEL emission level is < 0,05 mg/Nm3.
Iron and Steel Production - Metals - BAT28-III
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing heavy metals to water. The BAT-AEL emission level is < 0,1 mg/l.
Iron and Steel Production - Metals - BAT39-IV
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing heavy metals to water. The BAT-AEL emission level is < 0,55 mg/l.
Iron and Steel Production - NO2 - BAT23-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Process integrated measures (I.); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 500 mg/Nm3.
Iron and Steel Production - NO2 - BAT23-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; RAC (II.i); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 250 mg/Nm3.
Iron and Steel Production - NO2 - BAT23-III
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; SCR (II.ii); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 120 mg/Nm3.
Iron and Steel Production - NO2 - BAT49-III
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Techniques (I.)-(IV.) (see list) for New or substantially revamped plants (< 10 years old); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 350 - 500 mg/Nm3.
Iron and Steel Production - NO2 - BAT49-IV
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Techniques (I.)-(IV.) (see list) for Older plants (> 10 years old); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 500 - 650 mg/Nm3.
Iron and Steel Production - NO2 - BAT65-III
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Desulphurised and dedusted surplus coke oven gas, dedusted blast furnace gas, dedusted basic oxygen furnace gas and natural gas; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
Iron and Steel Production - Ni - BAT81-IV
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing nickel to water. The BAT-AEL emission level is < 0,5 mg/l.
Iron and Steel Production - Ni - BAT92-IV
Iron and Steel Production - PAH - BAT56-VI
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing polycyclic aromatic hydrocarbons (PAH) to water. The BAT-AEL emission level is < 0,05 mg/l.
Iron and Steel Production - PCDD.F - BAT25-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Bag filter; Reducing polychlorinated dibenzodioxins/ furans (PCDD/F) emissions to air. The BAT-AEL emission level is < 0,05 - 0,2 ng/Nm3.
Iron and Steel Production - PCDD.F - BAT25-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Advanced electrostatic precipitator; Reducing polychlorinated dibenzodioxins/ furans (PCDD/F) emissions to air. The BAT-AEL emission level is < 0,2 - 0,4 ng/Nm3.
Iron and Steel Production - PCDD.F - BAT89
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Techniques (I.)-(III.) (see list); Reducing polychlorinated dibenzodioxins/ furans (PCDD/F) emissions to air. The BAT-AEL emission level is < 0,1 ng/Nm3.
Iron and Steel Production - Pb - BAT67-III
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing lead to water. The BAT-AEL emission level is < 0,5 mg/l.
Iron and Steel Production - Phenols - BAT56-VII
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing phenols to water. The BAT-AEL emission level is < 0,5 mg/l.
Iron and Steel Production - S - BAT56-III
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing sulphides to water. The BAT-AEL emission level is < 0,1 mg/l.
Iron and Steel Production - SCN - BAT56-IV
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing thiocyanate (SCN-) to water. The BAT-AEL emission level is < 4 mg/l.
Iron and Steel Production - SO2 - BAT22-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; BAT I - IV (see list); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 350 - 500 mg/Nm3.
Iron and Steel Production - SO2 - BAT22-II
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; BAT V (see list); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 100 mg/Nm3.
Iron and Steel Production - SO2 - BAT34-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering; Wet scrubber, semi-dry absorption with a subsequent dedusting system; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 30 - 50 mg/Nm3.
Iron and Steel Production - SO2 - BAT49-I
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke; Techniques (I.)-(IV.) (see list); Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 - 500 mg/Nm3.
Iron and Steel Production - SO2 - BAT65-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour; Desulphurised and dedusted surplus coke oven gas, dedusted blast furnace gas, dedusted basic oxygen furnace gas and natural gas; Reducing sulphur oxides (SOx) emissions to air. The BAT-AEL emission level is < 200 mg/Nm3.
Iron and Steel Production - SS - BAT28-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing suspended solids to water. The BAT-AEL emission level is < 30 mg/l.
Iron and Steel Production - SS - BAT39-I
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing suspended solids to water. The BAT-AEL emission level is < 50 mg/l.
Iron and Steel Production - SS - BAT67-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing suspended solids to water. The BAT-AEL emission level is < 30 mg/l.
Iron and Steel Production - SS - BAT81-I
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing suspended solids to water. The BAT-AEL emission level is < 20 mg/l.
Iron and Steel Production - SS - BAT92-I
Iron and Steel Production - THC - BAT81-VI
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing total hydrocarbons to water. The BAT-AEL emission level is < 5 mg/l.
Iron and Steel Production - THC - BAT92-VI
Iron and Steel Production - TKN - BAT39-III
2, Production and processing of metals: 2,1 Metal ore (including sulphide ore) roasting or sintering Reducing kjeldahl nitrogen to water. The BAT-AEL emission level is < 45 mg/l.
Iron and Steel Production - TN - BAT56-VIII
1, Energy industries undertaking activities related to 2.2: 1,3 Production of coke Reducing sum of ammonia-nitrogen (NH4+ - N), nitrate-nitrogen (NO3- - N) and nitrite-nitrogen (NO2- - N) to water. The BAT-AEL emission level is < 15 - 50 mg/l.
Iron and Steel Production - Zn - BAT67-IV
2, Production and processing of metals: 2,2 Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5�tonnes per hour Reducing zinc to water. The BAT-AEL emission level is < 2 mg/l.
Iron and Steel Production - Zn - BAT81-III
Iron and Steel Production - Zn - BAT92-III
Large combustion plants - CH4 - BAT45-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing methane emissions to air. The BAT-AEL emission level is 215�500 mg/Nm3.
Large combustion plants - CH4 - BAT45-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing methane emissions to air. The BAT-AEL emission level is 215�560 mg/Nm3.
Large combustion plants - As - BAT15-VIII
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing arsenic to water. The BAT-AEL emission level is 10�50 �g/l .
Large combustion plants - COD - BAT15-II
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 60�150 mg/l .
Large combustion plants - Cd - BAT15-IX
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing cadmium to water. The BAT-AEL emission level is 2�5 �g/l .
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing chromium to water. The BAT-AEL emission level is 10�50 �g/l .
Large combustion plants - Cu - BAT15-XI
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing copper to water. The BAT-AEL emission level is 10�50 �g/l .
Large combustion plants - Dust - BAT22-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Large combustion plants - Dust - BAT22-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�18 mg/Nm3.
Large combustion plants - Dust - BAT22-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 4�16 mg/Nm3.
Large combustion plants - Dust - BAT22-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 4�22 mg/Nm3.
Large combustion plants - Dust - BAT22-IX
Large combustion plants - Dust - BAT22-V
Large combustion plants - Dust - BAT22-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�14 mg/Nm3.
Large combustion plants - Dust - BAT22-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 3�15 mg/Nm3.
Large combustion plants - Dust - BAT22-VIII
Large combustion plants - Dust - BAT22-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT22-XI
Large combustion plants - Dust - BAT22-XII
Large combustion plants - Dust - BAT22-XIII
Large combustion plants - Dust - BAT22-XIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�8 mg/Nm3.
Large combustion plants - Dust - BAT22-XV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 3�10 mg/Nm3.
Large combustion plants - Dust - BAT22-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 3�11 mg/Nm3.
Large combustion plants - Dust - BAT26-I
Large combustion plants - Dust - BAT26-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�15 mg/Nm3.
Large combustion plants - Dust - BAT26-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT26-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�22 mg/Nm3.
Large combustion plants - Dust - BAT26-IX
Large combustion plants - Dust - BAT26-V
Large combustion plants - Dust - BAT26-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�12 mg/Nm3.
Large combustion plants - Dust - BAT26-VII
Large combustion plants - Dust - BAT26-VIII
Large combustion plants - Dust - BAT26-X
Large combustion plants - Dust - BAT26-XI
Large combustion plants - Dust - BAT26-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�16 mg/Nm3.
Large combustion plants - Dust - BAT30-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT30-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�20 mg/Nm3.
Large combustion plants - Dust - BAT30-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 7�18 mg/Nm3.
Large combustion plants - Dust - BAT30-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 7�22 mg/Nm3.
Large combustion plants - Dust - BAT30-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Large combustion plants - Dust - BAT30-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT30-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 7�10 mg/Nm3.
Large combustion plants - Dust - BAT30-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 7�11 mg/Nm3.
Large combustion plants - Dust - BAT35-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 5�10 mg/Nm3.
Large combustion plants - Dust - BAT35-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 5�35 mg/Nm3.
Large combustion plants - Dust - BAT35-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 10�20 mg/Nm3.
Large combustion plants - Dust - BAT35-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 10�45 mg/Nm3.
Large combustion plants - Dust - BAT39-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Technique (a) (see table) for new and existing plants; Reducing dust emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Large combustion plants - Dust - BAT39-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Technique (a) (see table) for new and existing plants; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT51-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) in boilers; Reducing dust emissions to air. The BAT-AEL emission level is 2�7 mg/Nm3.
Large combustion plants - Dust - BAT51-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) in boilers; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT51-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table) in combined-cycle gas turbines (CCGTs); Reducing dust emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Large combustion plants - Dust - BAT51-IV
Large combustion plants - Dust - BAT58-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Large combustion plants - Dust - BAT58-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�15 mg/Nm3.
Large combustion plants - Dust - BAT58-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for New plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT58-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�22 mg/Nm3.
Large combustion plants - Dust - BAT58-V
Large combustion plants - Dust - BAT58-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - Dust - BAT58-VII
Large combustion plants - Dust - BAT58-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table). for Existing plant; Reducing dust emissions to air. The BAT-AEL emission level is 2�11 mg/Nm3.
Large combustion plants - Dust - BAT75-III
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Techniques (a)-(c) (see table); Reducing dust emissions to air. The BAT-AEL emission level is < 2,5 mg/Nm3.
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing fluorides to water. The BAT-AEL emission level is 10�25 mg/l.
Large combustion plants - Formaldehyde - BAT45-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New or existing plan; Reducing formaldehyde emissions to air. The BAT-AEL emission level is 5�15 mg/Nm3.
Large combustion plants - HCl - BAT21-XIX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�3 mg/Nm3.
Large combustion plants - HCl - BAT21-XVII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�6 mg/Nm3.
Large combustion plants - HCl - BAT21-XVIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Large combustion plants - HCl - BAT21-XX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�5 mg/Nm3.
Large combustion plants - HCl - BAT25-XIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�7 mg/Nm3.
Large combustion plants - HCl - BAT25-XIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�15 mg/Nm3.
Large combustion plants - HCl - BAT25-XIX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�12 mg/Nm3.
Large combustion plants - HCl - BAT25-XV
Large combustion plants - HCl - BAT25-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�35 mg/Nm3.
Large combustion plants - HCl - BAT25-XVII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�5 mg/Nm3.
Large combustion plants - HCl - BAT25-XVIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�9 mg/Nm3.
Large combustion plants - HCl - BAT25-XX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�12 mg/Nm3.
Large combustion plants - HCl - BAT25-XXI
Large combustion plants - HCl - BAT25-XXII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�5 mg/Nm3.
Large combustion plants - HCl - BAT25-XXIII
Large combustion plants - HCl - BAT25-XXIV
Large combustion plants - HCl - BAT57-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�7 mg/Nm3.
Large combustion plants - HCl - BAT57-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 2�15 mg/Nm3.
Large combustion plants - HCl - BAT57-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�5 mg/Nm3.
Large combustion plants - HCl - BAT57-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for Existing plant; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1�9 mg/Nm3.
Large combustion plants - HF - BAT21-XXI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�3 mg/Nm3.
Large combustion plants - HF - BAT21-XXII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�6 mg/Nm3.
Large combustion plants - HF - BAT21-XXIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�2 mg/Nm3.
Large combustion plants - HF - BAT21-XXIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�3 mg/Nm3.
Large combustion plants - HF - BAT25-XXIX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Large combustion plants - HF - BAT25-XXV
Large combustion plants - HF - BAT25-XXVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1,5 mg/Nm3.
Large combustion plants - HF - BAT25-XXVII
Large combustion plants - HF - BAT25-XXVIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Large combustion plants - HF - BAT25-XXX
Large combustion plants - HF - BAT57-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�2 mg/Nm3.
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�3 mg/Nm3.
Large combustion plants - HF - BAT57-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�6 mg/Nm3.
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for Existing plant; Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is < 1�3 mg/Nm3.
Large combustion plants - Hg - BAT15-XII
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing mercury to water. The BAT-AEL emission level is 0,2�3 �g/l .
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�3 �g/Nm3.
Large combustion plants - Hg - BAT23-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�5 �g/Nm3.
Large combustion plants - Hg - BAT23-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�9 �g/Nm3.
Large combustion plants - Hg - BAT23-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�10 �g/Nm3.
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�2 �g/Nm3.
Large combustion plants - Hg - BAT23-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�4 �g/Nm3.
Large combustion plants - Hg - BAT23-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�4 �g/Nm3.
Large combustion plants - Hg - BAT23-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing mercury emissions to air. The BAT-AEL emission level is < 1�7 �g/Nm3.
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table); Reducing mercury emissions to air. The BAT-AEL emission level is < 1�5 �g/Nm3 .
Large combustion plants - Hg - BAT75-II
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Techniques (a)-(c) (see table); Reducing particulate-bound mercury emissions to air. The BAT-AEL emission level is < 1 �g/Nm3.
Large combustion plants - Metals - BAT68-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 22; Reducing metals emissions to air. The BAT-AEL emission level is 0,005�0,5 mg/Nm3 .
Large combustion plants - Metals - BAT68-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 22; Reducing metals emissions to air. The BAT-AEL emission level is 5�12 �g/Nm3.
Large combustion plants - Metals - BAT68-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 22; Reducing metals emissions to air. The BAT-AEL emission level is 0,005�0,2 mg/Nm3 .
Large combustion plants - Metals - BAT68-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 22; Reducing metals emissions to air. The BAT-AEL emission level is 5�6 �g/Nm3.
Large combustion plants - Metals - BAT69-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 26; Reducing metals emissions to air. The BAT-AEL emission level is 0,075�0,3 mg/Nm3.
Large combustion plants - Metals - BAT69-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use one or a combination of the techniques given in BAT 26; Reducing metals emissions to air. The BAT-AEL emission level is < 5 �g/Nm3.
Large combustion plants - Metals - BAT75-I
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Techniques (a)-(c) (see table); Reducing particulate-bound metals emissions to air. The BAT-AEL emission level is < 0,025 mg/Nm3.
1.� Energy industries; 5.� Waste management: 1.1Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above; Optimise the design and/or operation of SCR and/or SNCR; Reducing ammonia emissions to air. The BAT-AEL emission level is < 3�10 mg/Nm3 .
Large combustion plants - NOx - BAT20-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�150 mg/Nm3.
Large combustion plants - NOx - BAT20-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�270 mg/Nm3.
Large combustion plants - NOx - BAT20-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 155�200 mg/Nm3.
Large combustion plants - NOx - BAT20-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 165�330 mg/Nm3 .
Large combustion plants - NOx - BAT20-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in FBC boiler combusting coal and/or lignite and lignite-fired PC boiler. for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50-85 mg/Nm3.
Large combustion plants - NOx - BAT20-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50�100 mg/Nm3.
Large combustion plants - NOx - BAT20-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�180 mg/Nm3 .
Large combustion plants - NOx - BAT20-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 80�130 mg/Nm3 .
Large combustion plants - NOx - BAT20-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 155�210 mg/Nm3 .
Large combustion plants - NOx - BAT20-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in FBC boiler combusting coal and/or lignite and lignite-fired PC boiler. for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 85 - 150 mg/Nm3 .
Large combustion plants - NOx - BAT20-XI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in FBC boiler combusting coal and/or lignite and lignite-fired PC boiler. for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 80-125 mg/Nm3.
Large combustion plants - NOx - BAT20-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in FBC boiler combusting coal and/or lignite and lignite-fired PC boiler. for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 140-165 mg/Nm3 .
Large combustion plants - NOx - BAT20-XIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in coal-fired PC boiler. for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 65 � 85 mg/Nm3.
Large combustion plants - NOx - BAT20-XIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in coal-fired PC boiler. for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 65 � 150 mg/Nm3 .
Large combustion plants - NOx - BAT20-XV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in coal-fired PC boiler. for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 80 � 125 mg/Nm3 .
Large combustion plants - NOx - BAT20-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(e) (see table incl. footnote) in coal-fired PC boiler. for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 85 � 165 mg/Nm3 .
Large combustion plants - NOx - BAT24-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 70-150 mg/Nm3.
Large combustion plants - NOx - BAT24-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 70-225 mg/Nm3.
Large combustion plants - NOx - BAT24-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 120�200 mg/Nm3.
Large combustion plants - NOx - BAT24-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 120�275 mg/Nm3.
Large combustion plants - NOx - BAT24-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 40�140 mg/Nm3.
Large combustion plants - NOx - BAT24-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50�140 mg/Nm3.
Large combustion plants - NOx - BAT24-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50�180 mg/Nm3.
Large combustion plants - NOx - BAT24-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�200 mg/Nm3.
Large combustion plants - NOx - BAT24-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�220 mg/Nm3.
Large combustion plants - NOx - BAT24-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 40�150 mg/Nm3.
Large combustion plants - NOx - BAT24-XI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 65�150 mg/Nm3.
Large combustion plants - NOx - BAT24-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 95�165 mg/Nm3.
Large combustion plants - NOx - BAT28-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 75�200 mg/Nm3.
Large combustion plants - NOx - BAT28-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 150�270 mg/Nm3.
Large combustion plants - NOx - BAT28-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�215 mg/Nm3.
Large combustion plants - NOx - BAT28-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 210�330 mg/Nm3.
Large combustion plants - NOx - BAT28-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 45�75 mg/Nm3.
Large combustion plants - NOx - BAT28-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 45�100 mg/Nm3.
Large combustion plants - NOx - BAT28-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 85�100 mg/Nm3.
Large combustion plants - NOx - BAT28-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 85�110 mg/Nm3.
Large combustion plants - NOx - BAT33-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 115�190 mg/Nm3.
Large combustion plants - NOx - BAT33-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 125�625 mg/Nm3.
Large combustion plants - NOx - BAT33-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 145�300 mg/Nm3.
Large combustion plants - NOx - BAT33-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 150�750 mg/Nm3.
Large combustion plants - NOx - BAT44-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for new open-cycle gas turbines (OCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�35 mg/Nm3.
Large combustion plants - NOx - BAT44-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for new open-cycle gas turbines (OCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 25�50 mg/Nm3.
Large combustion plants - NOx - BAT44-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing OCGT (excluding turbines for mechanical drive applications); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�50 mg/Nm3.
Large combustion plants - NOx - BAT44-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing OCGT (excluding turbines for mechanical drive applications); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 25�55 mg/Nm3.
Large combustion plants - NOx - BAT44-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10�50 mg/Nm3.
Large combustion plants - NOx - BAT44-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for new combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10�30 mg/Nm3.
Large combustion plants - NOx - BAT44-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for new combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�40 mg/Nm3.
Large combustion plants - NOx - BAT44-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10�40 mg/Nm3.
Large combustion plants - NOx - BAT44-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 18-50 mg/Nm3.
Large combustion plants - NOx - BAT44-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 18-55 mg/Nm3.
Large combustion plants - NOx - BAT44-XI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10-45 mg/Nm3.
Large combustion plants - NOx - BAT44-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 35-55 mg/Nm3.
Large combustion plants - NOx - BAT44-XIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 25-50 mg/Nm3.
Large combustion plants - NOx - BAT44-XIV
Large combustion plants - NOx - BAT44-XIX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50�100 mg/Nm3.
Large combustion plants - NOx - BAT44-XV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for open- and combined-cycle gas turbines put into operation no later than 27 November 2003, or existing gas turbine for emergency use and operated < 500 h/yr; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 60�140 mg/Nm3.
Large combustion plants - NOx - BAT44-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�50 mg/Nm3.
Large combustion plants - NOx - BAT44-XVII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 25-55 mg/Nm3.
Large combustion plants - NOx - BAT44-XVIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10�60 mg/Nm3.
Large combustion plants - NOx - BAT44-XX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30�85 mg/Nm3.
Large combustion plants - NOx - BAT44-XXI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 85�110 mg/Nm3.
Large combustion plants - NOx - BAT44-XXII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�75 mg/Nm3.
Large combustion plants - NOx - BAT44-XXIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�100 mg/Nm3.
Large combustion plants - NOx - BAT44-XXIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 55�85 mg/Nm3.
Large combustion plants - NOx - BAT44-XXV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Ensure optimised combustion and/or to use oxidation catalysts for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 55�110 mg/Nm3.
Large combustion plants - NOx - BAT49-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for New boilers; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�65 mg/Nm3.
Large combustion plants - NOx - BAT49-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for New boilers; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 22�100 mg/Nm3.
Large combustion plants - NOx - BAT49-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for Existing boilers; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�100 mg/Nm3.
Large combustion plants - NOx - BAT49-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for Existing boilers; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 22�110 mg/Nm3.
Large combustion plants - NOx - BAT49-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for new combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�35 mg/Nm3.
Large combustion plants - NOx - BAT49-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for new combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30�50 mg/Nm3.
Large combustion plants - NOx - BAT49-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�50 mg/Nm3.
Large combustion plants - NOx - BAT49-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) for existing combined-cycle gas turbines (CCGTs); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30�55 mg/Nm3.
Large combustion plants - NOx - BAT53-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(d) (see table). for new open-cycle gas turbines on offshore platforms; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 15�50 mg/Nm3.
Large combustion plants - NOx - BAT53-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(d) (see table). for existing open-cycle gas turbines on offshore platforms; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 50�350 mg/Nm3.
Large combustion plants - NOx - BAT56-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30�85 mg/Nm3.
Large combustion plants - NOx - BAT56-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 80�290 mg/Nm3.
Large combustion plants - NOx - BAT56-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50�110 mg/Nm3.
Large combustion plants - NOx - BAT56-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100�330 mg/Nm3.
Large combustion plants - NOx - BAT56-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20�80 mg/Nm3.
Large combustion plants - NOx - BAT56-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 70�100 mg/Nm3.
Large combustion plants - NOx - BAT56-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30�100 mg/Nm3.
Large combustion plants - NOx - BAT56-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(i) (see table). for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 85�110 mg/Nm3.
Large combustion plants - NOx - BAT73-I
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Use one or a combination of the techniques given below: (a)-(e) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 10�25 mg/Nm3 .
Large combustion plants - NOx - BAT73-II
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Use one or a combination of the techniques given below: (a)-(e) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 12�45 mg/Nm3 .
Large combustion plants - NOx - BAT73-III
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Use one or a combination of the techniques given below: (a)-(e) (see table) for New plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1�35 mg/Nm3 .
Large combustion plants - NOx - BAT73-IV
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Use one or a combination of the techniques given below: (a)-(e) (see table) for Existing plant; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 1�60 mg/Nm3 .
Large combustion plants - Ni - BAT15-XIII
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing nickel to water. The BAT-AEL emission level is 10�50 �g/l .
Large combustion plants - PCDD.F - BAT59
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table); Reducing PCDD/F emissions to air. The BAT-AEL emission level is < 0,012�0,036 ng I-TEQ/Nm3 .
Large combustion plants - PCDD.F - BAT71-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use a combination of the techniques given in BAT 6, BAT 26 and techniques (a)-(c) (see table); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,01-0,03 ng I-TEQ/Nm3 .
Large combustion plants - Pb - BAT15-XIV
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing lead to water. The BAT-AEL emission level is 10�20 �g/l .
Large combustion plants - SO2 - BAT21-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 150�200 mg/Nm3.
Large combustion plants - SO2 - BAT21-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 150�360 mg/Nm3 .
Large combustion plants - SO2 - BAT21-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 170�220 mg/Nm3 .
Large combustion plants - SO2 - BAT21-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 170�400 mg/Nm3.
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing sulphide to water. The BAT-AEL emission level is 0,1�0,2 mg/l.
Large combustion plants - SO2 - BAT21-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in PC boilers for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10�75 mg/Nm3 .
Large combustion plants - SO2 - BAT21-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 80�150 mg/Nm3 .
Large combustion plants - SO2 - BAT21-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 95�200 mg/Nm3 .
Large combustion plants - SO2 - BAT21-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 135�200 mg/Nm3 .
Large combustion plants - SO2 - BAT21-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 135�220 mg/Nm3 .
Large combustion plants - SO2 - BAT21-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in PC boilers for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10�130 mg/Nm3.
Large combustion plants - SO2 - BAT21-XI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in PC boilers for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 25�110 mg/Nm3.
Large combustion plants - SO2 - BAT21-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in PC boilers for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 25�165 mg/Nm3 .
Large combustion plants - SO2 - BAT21-XIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in fluidised bed boilers for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 20�75 mg/Nm3 .
Large combustion plants - SO2 - BAT21-XIV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in fluidised bed boilers for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 20�180 mg/Nm3 .
Large combustion plants - SO2 - BAT21-XV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in fluidised bed boilers for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 25�110 mg/Nm3.
Large combustion plants - SO2 - BAT21-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(j) (see table) in fluidised bed boilers for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�220 mg/Nm3.
Large combustion plants - SO2 - BAT25-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 15�70 mg/Nm3.
Large combustion plants - SO2 - BAT25-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 15�100 mg/Nm3.
Large combustion plants - SO2 - BAT25-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 30�175 mg/Nm3.
Large combustion plants - SO2 - BAT25-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 30�215 mg/Nm3.
Large combustion plants - SO2 - BAT25-IX
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 10�35 mg/Nm3.
Large combustion plants - SO2 - BAT25-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 10�50 mg/Nm3.
Large combustion plants - SO2 - BAT25-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 10�70 mg/Nm3.
Large combustion plants - SO2 - BAT25-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 20�85 mg/Nm3.
Large combustion plants - SO2 - BAT25-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 20�175 mg/Nm3.
Large combustion plants - SO2 - BAT25-X
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 10�50 mg/Nm3.
Large combustion plants - SO2 - BAT25-XI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 20�70 mg/Nm3.
Large combustion plants - SO2 - BAT25-XII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(h) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 20�85 mg/Nm3.
Large combustion plants - SO2 - BAT29-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�175 mg/Nm3.
Large combustion plants - SO2 - BAT29-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�175 mg/Nm3.
Large combustion plants - SO2 - BAT29-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 150�200 mg/Nm3.
Large combustion plants - SO2 - BAT29-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 150�200 mg/Nm3.
Large combustion plants - SO2 - BAT29-V
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 35�50 mg/Nm3.
Large combustion plants - SO2 - BAT29-VI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�110 mg/Nm3.
Large combustion plants - SO2 - BAT29-VII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for New plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�120 mg/Nm3.
Large combustion plants - SO2 - BAT29-VIII
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(f) (see table) for Existing plant; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 150�165 mg/Nm3.
Large combustion plants - SO2 - BAT34-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for New combustion plant (all sizes); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 45�100 mg/Nm3.
Large combustion plants - SO2 - BAT34-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for Existing combustion plant (all sizes); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 100�200 mg/Nm3.
Large combustion plants - SO2 - BAT34-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for New combustion plant (all sizes); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 60�110 mg/Nm3.
Large combustion plants - SO2 - BAT34-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table) for Existing combustion plant (all sizes); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 105�235 mg/Nm3.
Large combustion plants - SO2 - BAT39-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Technique (a) (see table) for new and existing plants; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 35�60 mg/Nm3.
Large combustion plants - SO2 - BAT39-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Technique (a) (see table) for new and existing plants; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�66 mg/Nm3.
Large combustion plants - SO2 - BAT50-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) in boilers; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 25�150 mg/Nm3.
Large combustion plants - SO2 - BAT50-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) in boilers; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50�200 mg/Nm3.
Large combustion plants - SO2 - BAT50-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) in combined-cycle gas turbines (CCGTs); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10�45 mg/Nm3.
Large combustion plants - SO2 - BAT50-IV
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(b) (see table) in combined-cycle gas turbines (CCGTs); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 20�70 mg/Nm3.
Large combustion plants - SO2 - BAT57-I
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New and existing boilers; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10�110 mg/Nm3.
Large combustion plants - SO2 - BAT57-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(g) (see table). for New and existing boilers; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 90�200 mg/Nm3.
1. Energy industries: 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; Acid gas removal (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 3�16 mg/Nm3.
Large combustion plants - TVOC - BAT15-XVI
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Techniques (a)-(c) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 0,6�12 mg/Nm3 .
Large combustion plants - SO3 - BAT15-VII
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing sulphite to water. The BAT-AEL emission level is 1�20 mg/l .
Large combustion plants - SO4 - BAT15-V
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing sulphates to water. The BAT-AEL emission level is 1,3�2,0 g/l .
Large combustion plants - TOC - BAT15-I
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing total organic carbon (TOC) to water. The BAT-AEL emission level is 20�50 mg/l .
Large combustion plants - TSS - BAT15-III
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing total suspended solids to water. The BAT-AEL emission level is 10�30 mg/l .
Large combustion plants - TVOC - BAT71-II
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use a combination of the techniques given in BAT 6, BAT 26 and techniques (a)-(c) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is <0,1-5 mg/Nm3.
Large combustion plants - TVOC - BAT71-III
1. Energy industries: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; Use a combination of the techniques given in BAT 6, BAT 26 and techniques (a)-(c) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 0,5-10 mg/Nm3.
Large combustion plants - Zn - BAT15-XV
1.� Energy industries; 5.� Waste management: 1.1, Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more; 1.4, Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant; 5.2, Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. Reducing zinc to water. The BAT-AEL emission level is 50�200 �g/l .
Production of Large Volume Organic Chemicals - Benzene - BAT57-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (b) oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; Techniques (a)-(d) (see table); Reducing benzene emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Production of Large Volume Organic Chemicals - Cl2 - BAT66-IV
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing chlorides emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Production of Large Volume Organic Chemicals - Cl2 - BAT67-IV
Production of Large Volume Organic Chemicals - Cl2 - BAT76-III
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons; treat the combined waste gas streams from EDC and/or VCM production by using a thermal oxidiser followed by two-stage wet scrubbing; Reducing chlorides emissions to air. The BAT-AEL emission level is < 1�4 mg/Nm3, at 11 vol-% O2.
Production of Large Volume Organic Chemicals - Cl2 - BAT77-III
Production of Large Volume Organic Chemicals - Cu - BAT80-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons Reducing copper to water. The BAT-AEL emission level is 0,04�0,2 g/t EDC produced by oxychlorination .
Production of Large Volume Organic Chemicals - EDC - BAT80-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons Reducing EDC to water. The BAT-AEL emission level is 0,01�0,05 g/t EDC purified .
Production of Large Volume Organic Chemicals - EDCVCM - BAT76-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons; treat the combined waste gas streams from EDC and/or VCM production by using a thermal oxidiser followed by two-stage wet scrubbing; Reducing EDC and VCM emissions to air. The BAT-AEL emission level is < 1 mg/Nm3, at 11 vol-% O2.
Production of Large Volume Organic Chemicals - EDCVCM - BAT77-II
Production of Large Volume Organic Chemicals - Formaldehyde - BAT45-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (b) oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; Techniques (a)-(c) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is 2�5 mg/Nm3.
Production of Large Volume Organic Chemicals - HCl - BAT66-V
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3.
Production of Large Volume Organic Chemicals - HCl - BAT67-V
Production of Large Volume Organic Chemicals - HCl - BAT76-IV
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons; treat the combined waste gas streams from EDC and/or VCM production by using a thermal oxidiser followed by two-stage wet scrubbing; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 2�10 mg/Nm3, at 11 vol-% O2.
Production of Large Volume Organic Chemicals - HCl - BAT77-IV
Production of Large Volume Organic Chemicals - NH3 - BAT4-III
4. Chemical industry: 4.1, Production of organic chemicals, such as: (a) simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or�aromatic); Techniques (a)-(h) (see table) and optimise the design and/or operation of SCR or SNCR; Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is < 5�15 mg/Nm�, at 3 vol-% O2.
Production of Large Volume Organic Chemicals - NOx - BAT4-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (a) simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or�aromatic); Techniques (a)-(h) (see table) and optimise the design and/or operation of SCR or SNCR for New furnace; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 60�100 mg/Nm�, at 3 vol-% O2.
Production of Large Volume Organic Chemicals - NOx - BAT4-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (a) simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or�aromatic); Techniques (a)-(h) (see table) and optimise the design and/or operation of SCR or SNCR for Existing furnace; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 70�200 mg/Nm�, at 3 vol-% O2.
Production of Large Volume Organic Chemicals - PCDD.F - BAT66-VI
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing PCDD/F emissions to air. The BAT-AEL emission level is 0,025�0,08 ng I-TEQ/Nm3 .
Production of Large Volume Organic Chemicals - PCDD.F - BAT67-VI
Production of Large Volume Organic Chemicals - PCDD.F - BAT76-V
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons; treat the combined waste gas streams from EDC and/or VCM production by using a thermal oxidiser followed by two-stage wet scrubbing; Reducing PCDD/F emissions to air. The BAT-AEL emission level is 0,025�0,08 ng I-TEQ/Nm3.
Production of Large Volume Organic Chemicals - PCDD.F - BAT77-V
Production of Large Volume Organic Chemicals - PCDD.F - BAT80-III
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons Reducing PCDD/F to water. The BAT-AEL emission level is 0,1� 0,3 �g I-TEQ/t EDC produced by oxychlorination .
Production of Large Volume Organic Chemicals - TVOC - BAT45-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (b) oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; Techniques (a)-(c) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is < 5�30 mg/Nm3.
Production of Large Volume Organic Chemicals - TVOC - BAT51
4. Chemical industry: 4.1, Production of organic chemicals, such as: (b) oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; Techniques (a)-(c) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 1�10 g/t of EO produced .
Production of Large Volume Organic Chemicals - TVOC - BAT57-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (b) oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; Techniques (a)-(d) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 5�30 mg/Nm3.
Production of Large Volume Organic Chemicals - TVOC - BAT66-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing TVOC emissions to air. The BAT-AEL emission level is 1�5 mg/Nm3.
Production of Large Volume Organic Chemicals - TVOC - BAT67-I
Production of Large Volume Organic Chemicals - TVOC - BAT76-I
4. Chemical industry: 4.1, Production of organic chemicals, such as: (f) halogenic hydrocarbons; treat the combined waste gas streams from EDC and/or VCM production by using a thermal oxidiser followed by two-stage wet scrubbing; Reducing TVOC emissions to air. The BAT-AEL emission level is 0,5�5 mg/Nm3, at 11 vol-% O2.
Production of Large Volume Organic Chemicals - TVOC - BAT77-I
Production of Large Volume Organic Chemicals - TVOC - BAT86
4. Chemical industry: 4.2. Production of inorganic chemicals, such as: (e) non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide; Techniques (a)-(d) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 5�25 mg/Nm3 .
Production of Large Volume Organic Chemicals - Tetrachloromethane - BAT66-II
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing tertachloromethane emissions to air. The BAT-AEL emission level is ? 0,5 g/t MDI produced .
Production of Large Volume Organic Chemicals - Tetrachloromethane - BAT66-III
4. Chemical industry: 4.1, Production of organic chemicals, such as: (d) nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; Treat combined waste gas streams using a thermal oxidiser followed by caustic scrubbing; Reducing tertachloromethane emissions to air. The BAT-AEL emission level is ? 0,7 g/t TDI produced .
Production of Large Volume Organic Chemicals - Tetrachloromethane - BAT67-II
Production of Large Volume Organic Chemicals - Tetrachloromethane - BAT67-III
Non-Ferrous Metals industries - Ag - BAT17-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing mercury to water. The BAT-AEL emission level is ? 0,6 mg/l.
Non-Ferrous Metals industries - As - BAT17-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing arsenic to water. The BAT-AEL emission level is ? 0,1 mg/l.
Non-Ferrous Metals industries - As - BAT17-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing arsenic to water. The BAT-AEL emission level is ? 0,3 mg/l.
Non-Ferrous Metals industries - AsH3SbH3 - BAT114-III
2, Production and processing of metals: 2.5: Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote); Reducing arsenic and antimony emissions to air. The BAT-AEL emission level is ? 0,5 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT178-II
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Bag filter; Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is ? 0,01 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT179-II
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(d) (see table incl. footnote); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,001-0,01 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT180-II
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(c) (see table incl. footnote); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,005-0,015 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT181-II
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(c) (see table incl. footnote); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,001-0,01 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT59-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote) in a paste plant (hot pitch storage, paste mixing, cooling and forming); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,001 - 0,01 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT60-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(d) (see table incl. footnote); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,001-0,01 mg/Nm3.
Non-Ferrous Metals industries - BaP - BAT61-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Use a pre-filtration unit and a regenerative thermal oxidiser followed by a dry scrubber (e.g. lime bed); Reducing benzo[a]pyrene emissions to air. The BAT-AEL emission level is 0,001-0,01 mg/Nm3.
Non-Ferrous Metals industries - CO - BAT17-VII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing silver to water. The BAT-AEL emission level is ? 0,1 mg/l.
Non-Ferrous Metals industries - CO - BAT17-VIII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing silver to water. The BAT-AEL emission level is 0,1-0,5 mg/l.
Non-Ferrous Metals industries - Cd - BAT132-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table incl. footnote); Reducing cadmium emissions to air. The BAT-AEL emission level is ? 0,1 mg/Nm3.
Non-Ferrous Metals industries - Cd - BAT17-IV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing cadmium to water. The BAT-AEL emission level is 0,02�0,1 mg/l.
Non-Ferrous Metals industries - Cd - BAT17-V
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing cadmium to water. The BAT-AEL emission level is ? 0,1 mg/l.
Non-Ferrous Metals industries - Cd - BAT17-VI
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing cadmium to water. The BAT-AEL emission level is ? 0,05 mg/l.
Non-Ferrous Metals industries - Cl2 - BAT144-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Alkaline scrubber; Reducing chlorides emissions to air. The BAT-AEL emission level is 0,5-2 mg/Nm3.
Non-Ferrous Metals industries - Cl2 - BAT172-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Wet scrubber; Reducing chlorides emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Cl2 - BAT84-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(d) (see table); Reducing chlorides emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Cr - BAT17-IX
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing cobalt to water. The BAT-AEL emission level is ? 0,2 mg/l.
Non-Ferrous Metals industries - Cr - BAT17-X
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing chromium to water. The BAT-AEL emission level is ? 0,05 mg/l.
Non-Ferrous Metals industries - Cu - BAT17-XI
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing copper to water. The BAT-AEL emission level is 0,05-0,5 mg/l.
Non-Ferrous Metals industries - Cu - BAT17-XII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing copper to water. The BAT-AEL emission level is ? 0,2 mg/l.
Non-Ferrous Metals industries - Cu - BAT17-XIII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing copper to water. The BAT-AEL emission level is ? 0,1 mg/l.
Non-Ferrous Metals industries - Cu - BAT17-XIV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing copper to water. The BAT-AEL emission level is ? 0,3 mg/l.
Non-Ferrous Metals industries - Cu - BAT17-XV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing copper to water. The BAT-AEL emission level is ? 0,5 mg/l.
Non-Ferrous Metals industries - Dust - BAT113
2, Production and processing of metals: 2.5: Processing of non-ferrous metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT119
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT121
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT122
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT128
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT132-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 3 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT140
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT158-I
Non-Ferrous Metals industries - Dust - BAT158-II
Non-Ferrous Metals industries - Dust - BAT158-III
Non-Ferrous Metals industries - Dust - BAT158-IV
Non-Ferrous Metals industries - Dust - BAT171
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter or a combination of an ESP and a bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT178-I
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT179-I
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(d) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 10 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT180-I
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(c) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 10 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT181-I
Non-Ferrous Metals industries - Dust - BAT37
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter for reception, storage, handling, transport, metering, mixing, blending, crushing, drying, cutting and screening of raw materials, and the pyrolytic treatment of copper turnings in primary and secondary copper production; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT38
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter for concentrate drying in primary copper production; Reducing dust emissions to air. The BAT-AEL emission level is 3 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT39
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter and/or a wet scrubber for primary copper smelter and converter (emissions other than those that are routed to the sulphuric acid or liquid SO 2 plant or power plant); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT40
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter for secondary copper smelter and converter and processing of secondary copper intermediates (emissions other than those that are routed to the sulphuric acid plant); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 4 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT41
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter for secondary copper holding furnace; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT42
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter or a scrubber in combination with an ESP for copper-rich slag furnace processing; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT43
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter or a scrubber in combination with an ESP for anode furnace (in primary and secondary copper production); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT44
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter or, in the case of off-gases with a water content close to the dew point, a wet scrubber or a demister for anode casting (in primary and secondary copper production); Reducing dust emissions to air. The BAT-AEL emission level is ? 5-15 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT45
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Bag filter for copper melting furnace; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT59-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote) in a a paste plant (hot pitch storage, paste mixing, cooling and forming, removing coke dust from operations such as coke storage and grindin); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT60-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(d) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT61-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Use a pre-filtration unit and a regenerative thermal oxidiser followed by a dry scrubber (e.g. lime bed); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT64-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; See three tables; Reducing dust emissions to air. The BAT-AEL emission level is ? 1,2 kg/t Al.
Non-Ferrous Metals industries - Dust - BAT64-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; See three tables; Reducing dust emissions to air. The BAT-AEL emission level is ? 0,6 kg/t Al.
Non-Ferrous Metals industries - Dust - BAT66
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is ? 5-10 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT67-I
Non-Ferrous Metals industries - Dust - BAT68
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 25 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT80
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT81
Non-Ferrous Metals industries - Dust - BAT82
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT88
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT94
Non-Ferrous Metals industries - Dust - BAT95
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter or a wet scrubber; Reducing dust emissions to air. The BAT-AEL emission level is ? 5 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT96-I
2, Production and processing of metals: 2.5: Processing of non-ferrous metals; Bag filter; Reducing dust emissions to air. The BAT-AEL emission level is 2 - 4 mg/Nm3.
Non-Ferrous Metals industries - Dust - BAT97-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(b) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 2 - 4 mg/Nm3.
Non-Ferrous Metals industries - F - BAT60-IV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(d) (see table incl. footnote); Reducing total fluorides emissions to air. The BAT-AEL emission level is ? 0,8 mg/Nm3.
Non-Ferrous Metals industries - F - BAT64-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; See three tables; Reducing total fluorides emissions to air. The BAT-AEL emission level is ? 0,6 kg/t Al.
Non-Ferrous Metals industries - F - BAT64-IV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; See three tables; Reducing total fluorides emissions to air. The BAT-AEL emission level is ? 0,35 kg/t Al.
Non-Ferrous Metals industries - F - BAT67-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing total fluorides emissions to air. The BAT-AEL emission level is ? 1,5 mg/Nm3.
Non-Ferrous Metals industries - H2S - BAT89-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Techniques (a)-(c) (see table incl. footnote); Reducing hydrogen sulphide emissions to air. The BAT-AEL emission level is ? 2 mg/Nm3.
Non-Ferrous Metals industries - H2SO4 - BAT114-II
2, Production and processing of metals: 2.5: Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote); Reducing sulphuric acid emissions to air. The BAT-AEL emission level is < 10 mg/Nm3.
Non-Ferrous Metals industries - HCl - BAT124-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(b) (see table incl. footnote); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is ? 1,5 mg/Nm3.
Non-Ferrous Metals industries - HCl - BAT144-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Alkaline scrubber; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is ? 5-10 mg/Nm3.
Non-Ferrous Metals industries - HCl - BAT84-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(d) (see table); Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is ? 5-10 mg/Nm3.
Non-Ferrous Metals industries - HF - BAT124-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(b) (see table incl. footnote); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is ? 0,3 mg/Nm3.
Non-Ferrous Metals industries - HF - BAT60-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(d) (see table incl. footnote); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is 0,3-0,5 mg/Nm3.
Non-Ferrous Metals industries - HF - BAT61-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Use a pre-filtration unit and a regenerative thermal oxidiser followed by a dry scrubber (e.g. lime bed); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is ? 3 mg/Nm3.
Non-Ferrous Metals industries - HF - BAT67-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is ? 1,0 mg/Nm3.
Non-Ferrous Metals industries - HF - BAT84-III
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(d) (see table incl. footnote); Reducing hydrogen fluoride emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Hg - BAT11
2, Production and processing of metals: 2.1, Metal ore (including sulphide ore) roasting or sintering; 2.5, Processing of non-ferrous metals; Techniques: (a)-(b) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 0,01 - 0,05 mg/Nm3.
Non-Ferrous Metals industries - Hg - BAT17-XVI
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing mercury to water. The BAT-AEL emission level is 0,005�0,02 mg/l.
Non-Ferrous Metals industries - Hg - BAT17-XVII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing mercury to water. The BAT-AEL emission level is ? 0,05 mg/l.
Non-Ferrous Metals industries - NH3 - BAT145
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Wet scrubber with sulphuric acid; Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is 1 - 3 mg/Nm3.
Non-Ferrous Metals industries - NH3 - BAT89-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Techniques (a)-(c) (see table incl. footnote); Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is ? 10 mg/Nm3.
Non-Ferrous Metals industries - NOx - BAT141
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 70 - 150 mg/Nm3.
Non-Ferrous Metals industries - Ni - BAT17-XIX
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing nickel to water. The BAT-AEL emission level is ? 0,1 mg/l.
Non-Ferrous Metals industries - Ni - BAT17-XVIII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing nickel to water. The BAT-AEL emission level is ? 0,5 mg/l.
Non-Ferrous Metals industries - Ni - BAT17-XX
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing nickel to water. The BAT-AEL emission level is ? 2 mg/l.
Non-Ferrous Metals industries - Ni - BAT172-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Wet scrubber; Reducing nickel emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Ni - BAT173
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Bag filter; Reducing nickel emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - PCDD.F - BAT123-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table incl. footnote); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,1 ng I-TEQ/Nm3 .
Non-Ferrous Metals industries - PCDD.F - BAT146
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(h) (see table incl. footnote); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,1 ng I-TEQ/Nm3 .
Non-Ferrous Metals industries - PCDD.F - BAT159
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Inject adsorbents and to use an ESP and/or a bag filter; Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,05 ng I-TEQ/Nm3.
Non-Ferrous Metals industries - PCDD.F - BAT48
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Techniques (a)-(j) (see table incl. footnote); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,1 ng I-TEQ/Nm3 .
Non-Ferrous Metals industries - PCDD.F - BAT83-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(e) (see table); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,1 ng I-TEQ/Nm3 .
Non-Ferrous Metals industries - PCDD.F - BAT99
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(j) (see table incl. footnote); Reducing PCDD/F emissions to air. The BAT-AEL emission level is ? 0,1 ng I-TEQ/Nm3 .
Non-Ferrous Metals industries - PH3 - BAT89-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Techniques (a)-(c) (see table incl. footnote); Reducing phosphene emissions to air. The BAT-AEL emission level is ? 0,5 mg/Nm3.
Non-Ferrous Metals industries - Pb - BAT17-XXI
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing lead to water. The BAT-AEL emission level is ? 0,5 mg/l.
Non-Ferrous Metals industries - Pb - BAT17-XXII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing lead to water. The BAT-AEL emission level is ? 0,2 mg/l.
Non-Ferrous Metals industries - Pb - BAT96-II
2, Production and processing of metals: 2.5: Processing of non-ferrous metals; Bag filter; Reducing lead emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Pb - BAT97-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(b) (see table); Reducing lead emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT100
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(d) (see table incl. footnotes); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50-350 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT120
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Wet desulphurisation technique; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is ? 500 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT142
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50 - 480 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT143
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Wet scrubber; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50 - 100 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT49-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote) in primary copper production; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50-500 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT49-II
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote) in secondary copper production; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50-300 mg/Nm3.
Non-Ferrous Metals industries - SO2 - BAT69
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(b) (see table incl. footnote); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is ? 2,5-15 kg/ t Al.
Non-Ferrous Metals industries - TVOC - BAT123-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table incl. footnote); Reducing TVOC emissions to air. The BAT-AEL emission level is 2 - 20 mg/Nm3.
Non-Ferrous Metals industries - TVOC - BAT183
6.� Other activities: 6.8: Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation; Techniques (a)-(b) (see table incl. footnote); Reducing TVOC emissions to air. The BAT-AEL emission level is ? 10-40 mg/Nm3.
Non-Ferrous Metals industries - TVOC - BAT46
2, Production and processing of metals: 2.5, Processing of non-ferrous metals; Techniques (a)-(e) (see table incl. footnote); Reducing TVOC emissions to air. The BAT-AEL emission level is 3 - 30 mg/Nm3.
Non-Ferrous Metals industries - TVOC - BAT83-I
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(e) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is ? 10-30 mg/Nm3.
Non-Ferrous Metals industries - TVOC - BAT98
2, Production and processing of metals: 2.5, Processing of non-ferrous metals: (b) melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals; Techniques (a)-(c) (see table incl. footnotes); Reducing TVOC emissions to air. The BAT-AEL emission level is 10 - 40 mg/Nm3.
Non-Ferrous Metals industries - Zn - BAT114-I
2, Production and processing of metals: 2.5: Processing of non-ferrous metals: (a) production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes; Techniques (a)-(c) (see table incl. footnote); Reducing zinc emissions to air. The BAT-AEL emission level is ? 1 mg/Nm3.
Non-Ferrous Metals industries - Zn - BAT17-XXIII
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing zinc to water. The BAT-AEL emission level is ? 1 mg/l.
Non-Ferrous Metals industries - Zn - BAT17-XXIV
2, Production and processing of metals: 2.5, Processing of non-ferrous metals Reducing zinc to water. The BAT-AEL emission level is ? 0,4 mg/l.
Production of pulp, paper and board - AOX - BAT19-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing adsorbable organically bound halogens (AOX) to water. The BAT-AEL emission level is 0 - 0,2 kg/ADt.
Production of pulp, paper and board - AOX - BAT33-IX
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing Adsorbable Organically Bound Halogens (AOX) to water. The BAT-AEL emission level is 0,5 � 1,5 mg/l.
Production of pulp, paper and board - AOX - BAT45-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing adsorbable organically bound halogens (AOX) to water. The BAT-AEL emission level is < 0,05 kg/t.
Production of pulp, paper and board - AOX - BAT45-XIV
Production of pulp, paper and board - AOX - BAT50-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing Adsorbable Organically Bound Halogens (AOX) to water. The BAT-AEL emission level is 0,05 kg/t.
Production of pulp, paper and board - AOX - BAT50-XI
Production of pulp, paper and board - COD - BAT19-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 7 - 20 kg/ADt.
Production of pulp, paper and board - COD - BAT19-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 2,5 - 8 kg/ADt.
Production of pulp, paper and board - COD - BAT33-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 10 � 30 kg/ADt.
Production of pulp, paper and board - COD - BAT33-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 20 � 35 kg/ADt.
Production of pulp, paper and board - COD - BAT33-X
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 3,2 � 11 kg/ADt.
Production of pulp, paper and board - COD - BAT40-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,9 � 4,5 kg/t.
Production of pulp, paper and board - COD - BAT40-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 12 � 20 kg/ADt.
Production of pulp, paper and board - COD - BAT45-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,4 - 1,4 kg/t.
Production of pulp, paper and board - COD - BAT45-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,9 - 3 kg/t.
Production of pulp, paper and board - COD - BAT45-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,9 - 4 kg/t.
Production of pulp, paper and board - COD - BAT50-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,15 � 1,5 kg/t.
Production of pulp, paper and board - COD - BAT50-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 0,3 � 5 kg/t .
Production of pulp, paper and board - Dust - BAT23-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1) for New or major refurbishment; Reducing dust emissions to air. The BAT-AEL emission level is 10 � 25 mg/Nm3 at 6 % O2 .
Production of pulp, paper and board - Dust - BAT23-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1) for Existing; Reducing dust emissions to air. The BAT-AEL emission level is 0,02 � 0,20 kg dust/ADt.
Production of pulp, paper and board - Dust - BAT23-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1) for New or major refurbishment; Reducing dust emissions to air. The BAT-AEL emission level is 10 � 40 mg/Nm3 at 6 % O2 .
Production of pulp, paper and board - Dust - BAT23-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1) for Existing; Reducing dust emissions to air. The BAT-AEL emission level is 0,02 � 0,3 kg dust/ADt.
Production of pulp, paper and board - Dust - BAT27-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1.) for New or major refurbishments; Reducing dust emissions to air. The BAT-AEL emission level is 10 � 25 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - Dust - BAT27-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1.) for New or major refurbishments; Reducing dust emissions to air. The BAT-AEL emission level is 0,005 � 0,02 kg dust/ADt .
Production of pulp, paper and board - Dust - BAT27-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1.) for Existing; Reducing dust emissions to air. The BAT-AEL emission level is 10 � 30 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - Dust - BAT27-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an electrostatic precipitator (ESP) or a combination of ESP and wet scrubber: see description (Section 1.7.1.1.) for Existing; Reducing dust emissions to air. The BAT-AEL emission level is 0,005 � 0,03 kg dust/ADt .
Production of pulp, paper and board - Dust - BAT37-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(b) (see table) and limit �acid operation� of the scrubbers to the minimum required to ensure their proper functioning; Reducing dust emissions to air. The BAT-AEL emission level is 5 � 20 mg/Nm3 at 5 % O2.
Production of pulp, paper and board - N - BAT33-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,15 � 0,3 kg/ADt.
Production of pulp, paper and board - N - BAT33-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,1 � 0,25 kg/ADt.
Production of pulp, paper and board - N - BAT33-XII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,1 � 0,2 kg/ADt.
Production of pulp, paper and board - N - BAT40-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,03 � 0,1 kg/t.
Production of pulp, paper and board - N - BAT40-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,15 � 0,18 kg/ADt.
Production of pulp, paper and board - N - BAT50-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,01 � 0,1 kg/t.
Production of pulp, paper and board - N - BAT50-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,01 � 0,15 kg/t.
Production of pulp, paper and board - N - BAT50-IX
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,015 � 0,4 kg/t .
Production of pulp, paper and board - NH3 - BAT36-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is < 5 mg/Nm3 at 5 % O2.
Production of pulp, paper and board - NO2 - BAT22-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrous oxides (NOx) emissions to air. The BAT-AEL emission level is 120 � 200 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - NO2 - BAT22-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrous oxides (NOx) emissions to air. The BAT-AEL emission level is 0,8 � 1,4 kg NOx/ADt.
Production of pulp, paper and board - NO2 - BAT22-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrous oxides (NOx) emissions to air. The BAT-AEL emission level is 1,0 � 1,6 kg NOx/ADt.
Production of pulp, paper and board - NO2 - BAT22-IV
Production of pulp, paper and board - NO2 - BAT22-V
Production of pulp, paper and board - NO2 - BAT22-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrous oxides (NOx) emissions to air. The BAT-AEL emission level is 1,0 � 1,7 kg NOx/ADt.
Production of pulp, paper and board - NO2 - BAT26-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 � 200 mg/Nm3 at 6 % O2 .
Production of pulp, paper and board - NO2 - BAT26-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 0,1 � 0,2 kg NOx/ADt .
Production of pulp, paper and board - NO2 - BAT26-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 � 350 mg/Nm3 at 6 % O2 .
Production of pulp, paper and board - NO2 - BAT26-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 0,1 � 0,3 kg NOx/ADt .
Production of pulp, paper and board - NO2 - BAT29-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(b) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 50 � 400 mg/Nm3 at 9 % O2.
Production of pulp, paper and board - NO2 - BAT29-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(b) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 0,01 � 0,1 kg NOx/ADt .
Production of pulp, paper and board - NO2 - BAT36-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 � 350 mg/Nm3 at 5 % O2 .
Production of pulp, paper and board - NO2 - BAT36-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 � 270 mg/Nm3 at 5 % O2.
Production of pulp, paper and board - S - BAT21-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing total reduced sulphur (TRS) emissions to air. The BAT-AEL emission level is 1 � 10 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - S - BAT21-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing total reduced sulphur (TRS) emissions to air. The BAT-AEL emission level is 1 � 5 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - S - BAT21-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing gaseous S emissions to air. The BAT-AEL emission level is 0,03 � 0,17 kg S/ADt.
Production of pulp, paper and board - S - BAT21-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing gaseous S emissions to air. The BAT-AEL emission level is 0,03 � 0,13 kg S/ADt.
Production of pulp, paper and board - S - BAT24-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing gaseous S emissions to air. The BAT-AEL emission level is 0,005 � 0,07 kg S/ADt.
Production of pulp, paper and board - S - BAT24-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing gaseous S emissions to air. The BAT-AEL emission level is 0,055 � 0,12 kg S/ADt.
Production of pulp, paper and board - S - BAT28-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an alkaline SO2 scrubber; Reducing TRS emissions to air. The BAT-AEL emission level is 1 � 5 mg/Nm3 at 9 % O2.
Production of pulp, paper and board - S - BAT28-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an alkaline SO2 scrubber; Reducing gaseous S emissions to air. The BAT-AEL emission level is 0,002 � 0,05 kg S/ADt.
Production of pulp, paper and board - SO2 - BAT21-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10 � 70 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT21-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 5 � 50 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT21-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 10 � 50 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT21-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 5 � 25 mg/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT24-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 5 � 70 mg SO2/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT24-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(d) (see table); Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 55 � 120 mg SO2/Nm3 at 6 % O2.
Production of pulp, paper and board - SO2 - BAT28-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Use an alkaline SO2 scrubber; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 20 � 120 mg/Nm3 at 9 % O2.
Production of pulp, paper and board - SO2 - BAT37-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(b) (see table) and limit �acid operation� of the scrubbers to the minimum required to ensure their proper functioning; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 100 � 300 mg/Nm3 at 5 % O2.
Production of pulp, paper and board - SO2 - BAT37-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(b) (see table) and limit �acid operation� of the scrubbers to the minimum required to ensure their proper functioning; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 50 � 250 mg/Nm3 at 5 % O2.
Production of pulp, paper and board - TN - BAT19-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,05 - 0,25 kg/ADt.
Production of pulp, paper and board - TN - BAT19-IX
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,1 - 0,2 kg/ADt.
Production of pulp, paper and board - TN - BAT45-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,008 - 0,09 kg/t.
Production of pulp, paper and board - TN - BAT45-X
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,01 - 0,1 kg/t.
Production of pulp, paper and board - TN - BAT45-XI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total nitrogen to water. The BAT-AEL emission level is 0,01 - 0,15 kg/t.
Production of pulp, paper and board - TP - BAT19-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,01 - 0,03 kg/ADt.
Production of pulp, paper and board - TP - BAT19-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,02 - 0,11 kg/ADt.
Production of pulp, paper and board - TP - BAT19-X
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,01 - 0,02 kg/ADt.
Production of pulp, paper and board - TP - BAT33-VII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorous to water. The BAT-AEL emission level is 0,01 � 0,05 kg/ADt.
Production of pulp, paper and board - TP - BAT33-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorous to water. The BAT-AEL emission level is 0,01 � 0,07 kg/ADt.
Production of pulp, paper and board - TP - BAT33-XIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,01 � 0,02 kg/ADt.
Production of pulp, paper and board - TP - BAT40-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,001 � 0,01 kg/t.
Production of pulp, paper and board - TP - BAT40-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,001 � 0,01 kg/ADt.
Production of pulp, paper and board - TP - BAT45-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,001 - 0,005 kg/t.
Production of pulp, paper and board - TP - BAT45-XII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,002 - 0,01 kg/t.
Production of pulp, paper and board - TP - BAT45-XIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,002 - 0,015 kg/t.
Production of pulp, paper and board - TP - BAT50-V
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,003 � 0,012 kg/t.
Production of pulp, paper and board - TP - BAT50-X
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total phosphorus to water. The BAT-AEL emission level is 0,002 � 0,04 kg/t .
Production of pulp, paper and board - TRS - BAT20
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table incl. footnotes); Reducing total reduced sulphur (TRS) emissions to air. The BAT-AEL emission level is 0,05 - 0,2 kg/Adt.
Production of pulp, paper and board - TRS - BAT25-I
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table incl. footnotes); Reducing total reduced sulphur (TRS) emissions to air. The BAT-AEL emission level is < 1 - 10 mg S/Nm3.
Production of pulp, paper and board - TRS - BAT25-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Techniques (a)-(c) (see table incl. footnotes); Reducing total reduced sulphur (TRS) emissions to air. The BAT-AEL emission level is < 1 - 40 mg S/Nm3.
Production of pulp, paper and board - TSS - BAT19-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,3 - 1,5 kg/ADt.
Production of pulp, paper and board - TSS - BAT19-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,3 - 1 kg/ADt.
Production of pulp, paper and board - TSS - BAT33-III
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,4 � 1,5 kg/ADt.
Production of pulp, paper and board - TSS - BAT33-IV
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,5 � 2,0 kg/ADt.
Production of pulp, paper and board - TSS - BAT33-XI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,5 � 1,3 kg/ADt.
Production of pulp, paper and board - TSS - BAT40-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,06 � 0,45 kg/t.
Production of pulp, paper and board - TSS - BAT40-VI
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,5 � 0,9 kg/ADt.
Production of pulp, paper and board - TSS - BAT45-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,02 - 0,2 kg/t.
Production of pulp, paper and board - TSS - BAT45-IX
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,1 - 0,4 kg/t.
Production of pulp, paper and board - TSS - BAT45-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,08 - 0,3 kg/t.
Production of pulp, paper and board - TSS - BAT50-II
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,02 � 0,35 kg/t.
Production of pulp, paper and board - TSS - BAT50-VIII
6. Other activities: 6.1 Production in industrial installations of: (a) pulp from timber or other fibrous materials; (b) paper or card board; Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 0,10 � 1 kg/t .
Refining of mineral oil and gas - Benzene - BAT12-IX
Energy industries : 1.2 Refining of mineral oil and gas Reducing benzene to water. The BAT-AEL emission level is 0,001 - 0,05 mg/l.
Refining of mineral oil and gas - Benzene - BAT52-II
Energy industries : 1.2 Refining of mineral oil and gas; Techniques (i) - (v) (see table); Reducing benzene emissions to air. The BAT-AEL emission level is < 1 mg/Nm3.
Refining of mineral oil and gas - CO - BAT27
Energy industries : 1.2 Refining of mineral oil and gas; Partial combustion mode ; Reducing carbon monoxide (CO) emissions to air. The BAT-AEL emission level is ? 100 mg/Nm3.
Refining of mineral oil and gas - CO - BAT37
Energy industries : 1.2 Refining of mineral oil and gas; Combustion operation control; Reducing carbon monoxide (CO) emissions to air. The BAT-AEL emission level is ? 100 mg/Nm3.
Refining of mineral oil and gas - COD - BAT12-III
Energy industries : 1.2 Refining of mineral oil and gas Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 30 - 125 mg/l.
Refining of mineral oil and gas - Cd - BAT12-VI
Energy industries : 1.2 Refining of mineral oil and gas Reducing cadmium to water. The BAT-AEL emission level is 0,002 - 0,008 mg/l.
Refining of mineral oil and gas - Dust - BAT25-I
Energy industries : 1.2 Refining of mineral oil and gas; Techniques I - II (see table); for New unit; Reducing dust emissions to air. The BAT-AEL emission level is 10 - 25 mg/Nm3.
Refining of mineral oil and gas - Dust - BAT25-II
Energy industries : 1.2 Refining of mineral oil and gas; Techniques I - II (see table); for Existing unit; Reducing dust emissions to air. The BAT-AEL emission level is 10 - 50 mg/Nm3.
Refining of mineral oil and gas - Dust - BAT32
Energy industries : 1.2 Refining of mineral oil and gas; Techniques (i) - (ii) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 10 - 50 mg/Nm3.
Refining of mineral oil and gas - Dust - BAT35-I
Energy industries : 1.2 Refining of mineral oil and gas; Multi-fuel firing for Existing unit; Reducing dust emissions to air. The BAT-AEL emission level is 5 - 50 mg/Nm3.
Refining of mineral oil and gas - Dust - BAT35-II
Energy industries : 1.2 Refining of mineral oil and gas; Multi-fuel firing for New unit < 50 MW; Reducing dust emissions to air. The BAT-AEL emission level is 5 - 25 mg/Nm3.
Refining of mineral oil and gas - HOI - BAT12-I
Energy industries : 1.2 Refining of mineral oil and gas Reducing hydrocarbon oil index (HOI) to water. The BAT-AEL emission level is 0,1 - 2,5 mg/l.
Refining of mineral oil and gas - Hg - BAT12-VIII
Energy industries : 1.2 Refining of mineral oil and gas Reducing mercury to water. The BAT-AEL emission level is 0,0001 - 0,001 mg/l.
Refining of mineral oil and gas - N - BAT12-IV
Energy industries : 1.2 Refining of mineral oil and gas Reducing total nitrogen to water. The BAT-AEL emission level is 1 - 25 mg/l.
Refining of mineral oil and gas - NH3 - BAT8
1, Energy industries : 1.2 Refining of mineral oil and gas; SCR/SNCR; Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is < 5 - 15 mg/Nm3.
Refining of mineral oil and gas - NMVOC - BAT52-I
Energy industries : 1.2 Refining of mineral oil and gas; Techniques (i) - (v) (see table); Reducing NMVOC emissions to air. The BAT-AEL emission level is 0,15 - 10 g/Nm3.
Refining of mineral oil and gas - NO2 - BAT24-I
Energy industries : 1.2 Refining of mineral oil and gas; All combustion modes for New unit; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 30 - 100 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT24-II
Energy industries : 1.2 Refining of mineral oil and gas; Full combustion mode for Existing unit; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is < 100 - 300 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT24-III
Energy industries : 1.2 Refining of mineral oil and gas; Partial combustion mode for Existing unit; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 100 - 400 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT34-I
Energy industries : 1.2 Refining of mineral oil and gas; Combustion unit for Existing turbine; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 40 - 120 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT34-II
Energy industries : 1.2 Refining of mineral oil and gas; Gas turbine (including combined cycle gas turbine � CCGT) and integrated gasification combined cycle turbine (IGCC)) for New turbine; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 20 - 50 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT34-III
Energy industries : 1.2 Refining of mineral oil and gas; Gas firing with exception of gas turbines for Existing unit; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30 - 150 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT34-IV
Energy industries : 1.2 Refining of mineral oil and gas; Gas firing with exception of gas turbines for New unit; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30 - 100 mg/Nm3.
Refining of mineral oil and gas - NO2 - BAT34-V
Energy industries : 1.2 Refining of mineral oil and gas; Multi-fuel fired combustion unit for Existing unit - should cover both new and existing ones; Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30 - 300 mg/Nm3.
Refining of mineral oil and gas - Ni - BAT12-VII
Energy industries : 1.2 Refining of mineral oil and gas Reducing nickel to water. The BAT-AEL emission level is 0,005 - 0,1 mg/l.
Refining of mineral oil and gas - Pb - BAT12-V
Energy industries : 1.2 Refining of mineral oil and gas Reducing lead to water. The BAT-AEL emission level is 0,005 - 0,03 mg/l.
Refining of mineral oil and gas - SO2 - BAT26-I
Energy industries : 1.2 Refining of mineral oil and gas; Techniques I - II (see table); for New units; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is ? 300 - mg/Nm3.
Refining of mineral oil and gas - SO2 - BAT26-II
Energy industries : 1.2 Refining of mineral oil and gas; Full combustion mode for Existing units; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 100 - 800 mg/Nm3.
Refining of mineral oil and gas - SO2 - BAT26-III
Energy industries : 1.2 Refining of mineral oil and gas; Partial combustion mode for Existing units; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is < 100 - 1200 mg/Nm3.
Refining of mineral oil and gas - SO2 - BAT36-I
Energy industries : 1.2 Refining of mineral oil and gas; RFG; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 5 - 35 mg/Nm3.
Refining of mineral oil and gas - SO2 - BAT36-II
Energy industries : 1.2 Refining of mineral oil and gas; Multi-fuel fired combustion units, with the exception of gas turbines and stationary gas engines for Existing units; Reducing sulphur dioxide (SO2) emissions to air. The BAT-AEL emission level is 35 - 600 mg/Nm3.
Refining of mineral oil and gas - TSS - BAT12-II
Energy industries : 1.2 Refining of mineral oil and gas Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 5 - 25 mg/l.
Tanning of Hides and Skins - BOD5 - BAT10-III
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing biological oxygen demand for 5 days (BOD5) to water. The BAT-AEL emission level is 15 - 25 mg/l.
Tanning of Hides and Skins - BOD5 - BAT10-IV
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing biological oxygen demand for 5 days (BOD5) to water. The BAT-AEL emission level is 15 - 25 mg/l.
Tanning of Hides and Skins - COD - BAT10-I
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 200 - 500 mg/l.
Tanning of Hides and Skins - COD - BAT10-II
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 200 - 500 mg/l.
Tanning of Hides and Skins - Cr - BAT10-IX
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing total chromium to water. The BAT-AEL emission level is < 0,3 - 1 mg/l.
Tanning of Hides and Skins - Cr - BAT10-X
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing total chromium to water. The BAT-AEL emission level is < 0,3 - 1 mg/l.
Tanning of Hides and Skins - Cr - BAT11-I
Tanning of Hides and Skins - Cr - BAT11-II
Tanning of Hides and Skins - Cr - BAT11-III
Tanning of Hides and Skins - Cr - BAT12-I
Tanning of Hides and Skins - N - BAT10-VII
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing ammoniacal nitrogen (NH4-N) to water. The BAT-AEL emission level is < 10 mg/l.
Tanning of Hides and Skins - N - BAT10-VIII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing ammoniacal nitrogen (NH4-N) to water. The BAT-AEL emission level is < 10 mg/l.
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day; Extraction ventilation system with bag filters or wet scrubbers; Reducing particulate matter emissions to air. The BAT-AEL emission level is 3 - 6 mg/Nm3.
Tanning of Hides and Skins - S - BAT10-XI
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing sulphide to water. The BAT-AEL emission level is < 1 mg/l.
Tanning of Hides and Skins - S - BAT10-XII
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing sulphide to water. The BAT-AEL emission level is < 1 mg/l.
Tanning of Hides and Skins - S - BAT12-II
Tanning of Hides and Skins - SS - BAT10-V
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day Reducing suspended solids to water. The BAT-AEL emission level is < 35 mg/l.
Tanning of Hides and Skins - SS - BAT10-VI
6, Other activities: 6,11 Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under 6.3 Reducing suspended solids to water. The BAT-AEL emission level is < 35 mg/l.
6, Other activities: 6,3 Tanning of hides and skins where the treatment capacity exceeds 12�tonnes of finished products per day; Techniques (a)-(b) (see table); Reducing volatile organic compounds (VOC) emissions to air. The BAT-AEL emission level is 9 - 23 g/m2.
Production of Wood-based Panels - C - BAT17-IV
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For PB and all dryer types; Reducing total Volatile Organic Compounds (TVOC) emissions to air. The BAT-AEL emission level is < 20 - 200 mg/Nm3.
Production of Wood-based Panels - C - BAT17-V
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For OSB and all dryer types; Reducing total Volatile Organic Compounds (TVOC) emissions to air. The BAT-AEL emission level is 10 - 400 mg/Nm3.
Production of Wood-based Panels - C - BAT17-VI
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For fibre and all dryer types; Reducing total Volatile Organic Compounds (TVOC) emissions to air. The BAT-AEL emission level is < 20 - 120 mg/Nm3.
Production of Wood-based Panels - C - BAT19-II
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(f) (see table); Reducing total Volatile Organic Compounds (TVOC) emissions to air. The BAT-AEL emission level is 10 - 100 mg/Nm3.
Production of Wood-based Panels - C - BAT21-I
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(e) (see table); Reducing total Volatile Organic Compounds (TVOC) emissions to air. The BAT-AEL emission level is 5 - 30 mg/Nm3.
Production of Wood-based Panels - CH2O - BAT17-IX
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For fibre and all dryer types; Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 5 - 15 mg/Nm3.
Production of Wood-based Panels - CH2O - BAT17-VII
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For PB and all dryer types; Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 5 - 10 mg/Nm3.
Production of Wood-based Panels - CH2O - BAT17-VIII
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For OSB and all dryer types; Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 5 - 20 mg/Nm3.
Production of Wood-based Panels - CH2O - BAT19-III
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(f) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is 2 - 15 mg/Nm3.
Production of Wood-based Panels - CH2O - BAT21-II
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(e) (see table); Reducing formaldehyde emissions to air. The BAT-AEL emission level is < 5 - 10 mg/Nm3.
Production of Wood-based Panels - COD - BAT27-II
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day. Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 20 - 200 mg/l.
Production of Wood-based Panels - NO2 - BAT18
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(b) (see table); Reducing nitrogen oxides (NOx) emissions to air. The BAT-AEL emission level is 30 - 250 mg/Nm3.
Production of Wood-based Panels - TPM - BAT17-I
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For PB or OSB and directly heated dryer; Reducing dust emissions to air. The BAT-AEL emission level is 3 - 30 mg/Nm3.
Production of Wood-based Panels - TPM - BAT17-II
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For PB or OSB and indirectly heated dryer; Reducing dust emissions to air. The BAT-AEL emission level is 3 - 10 mg/Nm3.
Production of Wood-based Panels - TPM - BAT17-III
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; For fibre and all dryer types; Reducing dust emissions to air. The BAT-AEL emission level is 3 - 20 mg/Nm3.
Production of Wood-based Panels - TPM - BAT19-I
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Techniques (a)-(f) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 3 - 15 mg/Nm3.
Production of Wood-based Panels - TPM - BAT20
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day; Bag filter or cyclofilter; Reducing dust emissions to air. The BAT-AEL emission level is < 3 - 5 mg/Nm3.
Production of Wood-based Panels - TSS - BAT25
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day. Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 10 - 40 mg/l.
Production of Wood-based Panels - TSS - BAT27-I
6, Other activities: 6,1 Production in industrial installations of: (c) one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard with a production capacity exceeding 600 m3 per day. Reducing total suspended solids (TSS) to water. The BAT-AEL emission level is 5 - 35 mg/l.
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing adsorbable organically bound halogens to water. The BAT-AEL emission level is 0,2-1 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing arsenic to water. The BAT-AEL emission level is 0,01-0,1 mg/l.
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing arsenic to water. The BAT-AEL emission level is 0,01-0,05 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Apply BAT 14d, BAT 14h and use technique (a) and one or both of the techniques (b) and (c); Reducing CFCs emissions to air. The BAT-AEL emission level is 0,5-10 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing free cyanide to water. The BAT-AEL emission level is 0,02-0,1 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 30-180 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing chemical oxygen demand (COD) to water. The BAT-AEL emission level is 30-300 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing cadmium to water. The BAT-AEL emission level is 0,01-0,1 mg/l.
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing cadmium to water. The BAT-AEL emission level is 0,01-0,05 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing chromium to water. The BAT-AEL emission level is 0,01-0,3 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing hexavalent chromium to water. The BAT-AEL emission level is 0,01-0,1 mg/l.
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing chromium to water. The BAT-AEL emission level is 0,01-0,15 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing copper to water. The BAT-AEL emission level is 0,05-0,5 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(r) (see table incl. footnotes) for treatment of water-based liquid waste; Reducing dust emissions to air. The BAT-AEL emission level is 2-5 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(e) (see table); Reducing dust emissions to air. The BAT-AEL emission level is 2-5 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Reducing dust emissions to air. The BAT-AEL emission level is 2-5 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Reducing hydrogen chloride emissions to air. The BAT-AEL emission level is 1-5 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing hydrocarbon oil index to water. The BAT-AEL emission level is 0,5-10 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing mercury to water. The BAT-AEL emission level is 1-10 �g/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing mercury to water. The BAT-AEL emission level is 0,5-5 �g/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(d) (see table); Reducing mercury emissions to air. The BAT-AEL emission level is 2-7 �g/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Collect mercury emissions at source, send them to abatement and carry out adequate monitoring (see description); Reducing ammonia (NH3) emissions to air. The BAT-AEL emission level is 0,3-20 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing nickel to water. The BAT-AEL emission level is 0,05-0,5 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing nickel to water. The BAT-AEL emission level is 0,05-1 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(e) (see table); Reducing odour concentration emissions to air. The BAT-AEL emission level is 200-1 000 ouE/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing lead to water. The BAT-AEL emission level is 0,05-0,1 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing lead to water. The BAT-AEL emission level is 0,05-0,3 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing phenol index to water. The BAT-AEL emission level is 0,05-0,2 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing phenol index to water. The BAT-AEL emission level is 0,05-0,3 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total nitrogen to water. The BAT-AEL emission level is 1-25 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total nitrogen to water. The BAT-AEL emission level is 10-60 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total organic carbon to water. The BAT-AEL emission level is 10-60 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total organic carbon to water. The BAT-AEL emission level is 10-100 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total phosphorus to water. The BAT-AEL emission level is 0,3-2 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total phosphorus to water. The BAT-AEL emission level is 1-3 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing total suspended solids to water. The BAT-AEL emission level is 5-60 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(d) (see table incl. footnote); Reducing TVOC emissions to air. The BAT-AEL emission level is 3-15 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Apply BAT 14d, BAT 14h and use technique (a) and one or both of the techniques (b) and (c); Reducing TVOC emissions to air. The BAT-AEL emission level is 10-30 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Techniques (a)-(e) (see table); Reducing TVOC emissions to air. The BAT-AEL emission level is 5-40 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Reducing TVOC emissions to air. The BAT-AEL emission level is 5-30 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above; Reducing TVOC emissions to air. The BAT-AEL emission level is 3-20 mg/Nm3 .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing zinc to water. The BAT-AEL emission level is 0,1-2 mg/l .
5.� Waste management; 6. Other activities: 5.1. Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities: (a)-(j) (see scope); 5.3. (a) Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC (1): (i)-(v) (see scope). (b) Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC: (i)-(iv) (see scope). 5.5. Temporary storage of hazardous waste not covered under point 5.4 of Annex I to Directive 2010/75/EU pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 of Annex I to Directive 2010/75/EU with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated. 6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation undertaking activities covered under points 5.1, 5.3 or 5.5 as listed above. Reducing zinc to water. The BAT-AEL emission level is 0,1-1 mg/l .
Production of Cement, Lime and Magnesium Oxide
Common Waste Water and Waste Gas Treatment/ Management Systems in the Chemical Sector
Production of Large Volume Organic Chemicals
In some circumstances there may be no applicable BATC for an IED permitted installation. In these cases this code list entry should be used.
Slaughterhouses and Animals By-products Industries
Surface Treatment Of Metals and Plastics
Surface Treatment Using Organic Solvents (including Wood and Wood Products Preservation with Chemicals)
Common Waste Gas Treatment in the Chemical Sector
This code list entry should be used where there will be a BATC for an activity but the BATC document has not yet been adopted. In some limited cases there is no relevant BATC available or planned for an activity and in these cases the alternative code list entry BATCNOTAPPLICABLE should be used
This BATC will cover all activities involved in Large Volume Inorganic Chemicals.
The status of an entity with regards to its completion and use.
The entity that was within the scope of EU law on industrial emissions is no longer within the scope of a relevant piece of EU law reporting to the EU Registry due to changes in its activity or decrease of capacity.
The entity is no longer used and is being or has been decommissioned/closed.
The entity is no longer used, but is not being or has not been decommissioned.
Strict ISO-3166 of countries that will report to the EU Registry
Derogation regimes under Chapter III of Directive 2010/75/EU
Plant due to additional reporting for operating under an annual average of 1500 hours.
Desulphurisation rate applied in accordance with clauses (1) and (2) of Article 31 of Directive 2010/75/EU
Exemption from compliance with emission limit values or desulphurisation rates due to coverage by transitional national plan, in accordance with Article 32(2) of Directive 2010/75/EU
Limited life time derogation granted in accordance with Article 33(1) of Directive 2010/75/EU
Exemption from compliance with emission limit values and desulphurisation rates due to being a small isolated system, in accordance with Article 34(1) of Directive 2010/75/EU
District heating plant exempted from compliance with emission limits values and rates of desulphurisation, in accordance with conditions listed in Article 35 of Directive 2010/75/EU
Activity values based on Annex 1 to Regulation EU no. 166/2006
Installations for gasification and liquefaction
Thermal power stations and other combustion installations
Coal rolling mills with a capacity of 1 tonne per hour
Installations for the manufacture of coal products and solid smokeless fuel
Metal ore (including sulphide ore) roasting or sintering installations
Installations for the production of pig iron or steel (primary or secondary melting) including continuous casting
Installations for the processing of ferrous metals. Note to reporters, use Level 3 activity e.g. 2(c)(i), in preference to 2(c). Level 2 activity class (i.e. 2(c)) only to be used where Level 3 is not available.
Installations for the processing of ferrous metals, Hot-rolling mills
Installations for the processing of ferrous metals, Smitheries with hammers
Installations for the processing of ferrous metals, Application of protective fused metal coats
Ferrous metal foundries with a production capacity of 20 tonnes per day
Ferrous metal foundries with a production capacity of 20 tonnes per day or more
Installations for the production and/or smelting of non-ferrous metals. Note to reporters, use Level 3 activity e.g. 2(e)(i), in preference to 2(e). Level 2 activity class (i.e. 2(e)) only to be used where Level 3 is not available.
Installation for the production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes
Installation for the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.)
Installation for the smelting, including the alloying, of non-ferrous metals, including recovered products (refining, foundry casting, etc.). The installations are under the scope of this category when the melting capacity of 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals
Installations for surface treatment of metals and plastic materials using an electrolytic or chemical process
Underground mining and related operations
Installations for the production of cement clinker in rotary kilns, lime in rotary kilns, cement or lime in other furnaces. Note to reporters, use Level 3 activity e.g. 3(c)(i), in preference to 3(c). Level 2 activity class (i.e. 3(c)) only to be used where Level 3 is not available.
Installations for the production of cement clinker in rotary kilns
Installations for the production of lime in rotary kilns
Installations for the production of cement clinker or lime in other furnaces
Installations for the production of asbestos and the manufacture of asbestos based products
Installations for the manufacture of glass, including glass fibre
Installations for melting mineral substances, including the production of mineral fibres
Installations for the manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain
Chemical installations for the production on an industrial scale of basic organic chemicals. Note to reporters, use Level 3 activity e.g. 4(a)(iii), in preference to 4(a). Level 2 activity class (i.e. 4(a)) only to be used where Level 3 is not available.
Chemical installations for the production on an industrial scale of basic organic chemicals: Simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic)
Chemical installations for the production on an industrial scale of basic organic chemicals: Synthetic rubbers
Chemical installations for the production on an industrial scale of basic organic chemicals: Oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters, acetates, ethers, peroxides, epoxy resins
Chemical installations for the production on an industrial scale of basic organic chemicals: Sulphurous hydrocarbons
Chemical installations for the production on an industrial scale of basic organic chemicals: Nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates
Chemical installations for the production on an industrial scale of basic organic chemicals: Phosphorus-containing hydrocarbons
Chemical installations for the production on an industrial scale of basic organic chemicals: Halogenic hydrocarbons
Chemical installations for the production on an industrial scale of basic organic chemicals: Organometallic compounds
Chemical installations for the production on an industrial scale of basic organic chemicals: Basic plastic materials (polymers, synthetic fibres and cellulose-based fibres)
Chemical installations for the production on an industrial scale of basic organic chemicals: Dyes and pigments
Chemical installations for the production on an industrial scale of basic organic chemicals: Surface-active agents and surfactants
Chemical installations for the production on an industrial scale of basic inorganic chemicals. Note to reporters, use Level 3 activity e.g. 4(b)(i), in preference to 4(b). Level 2 activity class (i.e. 4(b)) only to be used where Level 3 is not available.
Chemical installations for the production on an industrial scale of basic inorganic chemicals: Gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride
Chemical installations for the production on an industrial scale of basic inorganic chemicals: Acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids
Chemical installations for the production on an industrial scale of basic inorganic chemicals: Bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide
Chemical installations for the production on an industrial scale of basic inorganic chemicals: Salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate
Chemical installations for the production on an industrial scale of basic inorganic chemicals: Non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide
Chemical installations for the production on an industrial scale of phosphorous, nitrogen or potassium based fertilisers (simple or compound fertilisers)
Chemical installations for the production on an industrial scale of basic plant health products and of biocides
Installations using a chemical or biological process for the production on an industrial scale of basic pharmaceutical products
Installations for the production on an industrial scale of explosives and pyrotechnic products
Installations for the recovery or disposal of hazardous waste
Installations for the incineration of non-hazardous waste in the scope of Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste
Installations for the disposal of non-hazardous waste
Landfills (excluding landfills of inert waste and landfills, which were definitely closed before 16.7.2001 or for which the after-care phase required by the competent authorities according to Article 13 of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste has expired)
Installations for the disposal or recycling of animal carcasses and animal waste
Independently operated industrial waste-water treatment plants which serve one or more activities covered in annex 1 of Regulation 166/2006
Industrial plants for the production of pulp from timber or similar fibrous materials
Industrial plants for the production of paper and board and other primary wood products (such as chipboard, fibreboard and plywood)
Industrial plants for the preservation of wood and wood products with chemicals
Installations for the intensive rearing of poultry or pigs. Note to reporters, use Level 3 activity e.g. 7(a)(ii), in preference to 7(a). Level 2 activity class (i.e. 7(a)) only to be used where Level 3 is not available.
Installations for the intensive rearing of poultry with 40,000 places for poultry
Installations for the intensive rearing of pigs with 2,000 places for production pigs (over 30 kg)
Installations for the intensive rearing of pigs with 750 places for sows
Treatment and processing intended for the production of food and beverage products. Note to reporters, use Level 3 activity e.g. 8(b)(i), in preference to 8(b). Level 2 activity class (i.e. 8(b)) only to be used where Level 3 is not available.
Treatment and processing intended for the production of food and beverage products from animal raw materials (other than milk)
Treatment and processing intended for the production of food and beverage products from vegetable raw materials
Plants for the pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of fibres or textiles
Plants for the tanning of hides and skins
Installations for the surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating
Installations for the production of carbon (hard-burnt coal) or electro-graphite by means of incineration or graphitisation
Installations for the building of, and painting or removal of paint from ships with a capacity for ships 100 m long
Facility is subject to the E-PRTR regulation.
Facility is not subject to the E-PRTR regulation.
Activities listed in Annex I to Directive 2010/75/EU which are operated in the installation.
Combustion of fuels in installations with a total rated thermal input of 50 MW or more
Gasification or liquefaction of fuels other than coal, in installations with a total rated thermal input of 20 MW or more
Metal ore (including sulphide ore) roasting or sintering
Production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2.5 tonnes per hour
Processing of ferrous metals: operation of hot-rolling mills with a capacity exceeding 20 tonnes of crude steel per hour
Processing of ferrous metals: operation of smitheries with hammers the energy of which exceeds 50 kilojoule per hammer, where the calorific power used exceeds 20 MW
Processing of ferrous metals: application of protective fused metal coats with an input exceeding 2 tonnes of crude steel per hour.
Operation of ferrous metal foundries with a production capacity exceeding 20 tonnes per day
Processing of non-ferrous metals: production of non-ferrous crude metals from ore, concentrates or secondary raw materials by metallurgical, chemical or electrolytic processes
Processing of non-ferrous metals: melting, including the alloyage, of non-ferrous metals, including recovered products and operation of non-ferrous metal foundries, with a melting capacity exceeding 4 tonnes per day for lead and cadmium or 20 tonnes per day for all other metals.
Surface treatment of metals or plastic materials using an electrolytic or chemical process where the volume of the treatment vats exceeds 30 m3
Production of cement clinker in rotary kilns with a production capacity exceeding 500 tonnes per day or in other kilns with a production capacity exceeding 50 tonnes per day
Production of lime in kilns with a production capacity exceeding 50 tonnes per day
Production of magnesium oxide in kilns with a production capacity exceeding 50 tonnes per day
Production of asbestos or the manufacture of asbestos based products
Manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day
Melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20 tonnes per day
Manufacture of ceramic products by firing, in particular roofing tiles, bricks, refractory bricks, tiles, stoneware or porcelain with a production capacity exceeding 75 tonnes per day and/or with a kiln capacity exceeding 4 m3 and with a setting density per kiln exceeding 300 kg/m3
Production of organic chemicals: simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic)
Production of organic chemicals: oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins
Production of organic chemicals: sulphurous hydrocarbons
Production of organic chemicals: nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates
Production of organic chemicals: phosphorus-containing hydrocarbons
Production of organic chemicals: halogenic hydrocarbons
Production of organic chemicals: organometallic compounds
Production of organic chemicals: plastic materials (polymers, synthetic fibres and cellulose-based fibres)
Production of organic chemicals: synthetic rubbers
Production of organic chemicals: dyes and pigments
Production of organic chemicals: surface-active agents and surfactants
Production of inorganic chemicals: gases, such as ammonia, chlorine or hydrogen chloride, fluorine or hydrogen fluoride, carbon oxides, sulphur compounds, nitrogen oxides, hydrogen, sulphur dioxide, carbonyl chloride
Production of inorganic chemicals: acids, such as chromic acid, hydrofluoric acid, phosphoric acid, nitric acid, hydrochloric acid, sulphuric acid, oleum, sulphurous acids
Production of inorganic chemicals: bases, such as ammonium hydroxide, potassium hydroxide, sodium hydroxide
Production of inorganic chemicals: salts, such as ammonium chloride, potassium chlorate, potassium carbonate, sodium carbonate, perborate, silver nitrate
Production of inorganic chemicals: non-metals, metal oxides or other inorganic compounds such as calcium carbide, silicon, silicon carbide
Production of phosphorous, nitrogen or potassium based fertilisers (simple or compound fertilisers)
Production of plant protection products or of biocides
Production of pharmaceutical products including intermediates
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving one or more of the following activities.
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving biological treatment
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving physico-chemical treatment
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving blending or mixing prior to submission to any of the other activities listed in points 5.1 and 5.2
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving repackaging prior to submission to any of the other activities listed in points 5.1 and 5.2
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving solvent reclamation/regeneration
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving recycling/reclamation of inorganic materials other than metals or metal compounds
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving the regeneration of acids or bases
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving the recovery of components used for pollution abatement
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving the recovery of components from catalysts
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving oil re-refining or other reuses of oil
Disposal or recovery of hazardous waste with a capacity exceeding 10 tonnes per day involving surface impoundment
Disposal or recovery of waste in waste incineration plants or in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour
Disposal or recovery of waste in waste incineration plants or in waste co-incineration plants for hazardous waste with a capacity exceeding 10 tonnes per day
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities.
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving one or more of the following activities, and excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment.
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving biological treatment, excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving physico-chemical treatment ,excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving the pre-treatment of waste for incineration or co-incineration, excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving the treatment of slags and ashes, excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment
Disposal of non-hazardous waste with a capacity exceeding 50 tonnes per day involving treatment in shredders of metal waste, including waste electrical and electronic equipment and end-of-life vehicles and their components , and excluding activities covered by Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving one or more of the following activities, and excluding activities covered by Directive 91/271/EEC.
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving biological treatment, excluding activities covered by Directive 91/271/EEC
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving the pre-treatment of waste for incineration or co-incineration, excluding activities covered by Directive 91/271/EEC
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving the treatment of slags and ashes, excluding activities covered by Directive 91/271/EEC
Recovery, or a mix of recovery and disposal, of non-hazardous waste with a capacity exceeding 75 tonnes per day involving treatment in shredders of metal waste, including waste electrical and electronic equipment and end-of-life vehicles and their components, and excluding activities covered by Directive 91/271/EEC.
Landfills, as defined in Article 2(g) of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste, receiving more than 10 tonnes of waste per day or with a total capacity exceeding 25,000 tonnes, excluding landfills of inert waste
Temporary storage of hazardous waste not covered under point 5.4 pending any of the activities listed in points 5.1, 5.2, 5.4 and 5.6 with a total capacity exceeding 50 tonnes, excluding temporary storage, pending collection, on the site where the waste is generated
Underground storage of hazardous waste with a total capacity exceeding 50 tonnes
Production in industrial installations of pulp from timber or other fibrous materials
Production in industrial installations of paper or card board with a production capacity exceeding 20 tonnes per day
Production in industrial installations with a production capacity exceeding 600 m3 per day of one or more of the following wood-based panels: oriented strand board, particleboard or fibreboard
Preservation of wood and wood products with chemicals with a production capacity exceeding 75 m3 per day other than exclusively treating against sapstain
Independently operated treatment of waste water not covered by Directive 91/271/EEC and discharged by an installation covered by Chapter II of Directive 2010/75/EU
Pre-treatment (operations such as washing, bleaching, mercerisation) or dyeing of textile fibres or textiles where the treatment capacity exceeds 10 tonnes per day
Tanning of hides and skins where the treatment capacity exceeds 12 tonnes of finished products per day
Operating slaughterhouses with a carcass production capacity greater than 50 tonnes per day
Treatment and processing, other than exclusively packaging, of the following raw materials, whether previously processed or unprocessed, intended for the production of food or feed from only animal raw materials (other than exclusively milk) with a finished product production capacity greater than 75 tonnes per day
Treatment and processing, other than exclusively packaging, of the following raw materials, whether previously processed or unprocessed, intended for the production of food or feed from only vegetable raw materials with a finished product production capacity greater than 300 tonnes per day or 600 tonnes per day where the installation operates for a period of no more than 90 consecutive days in any year
Treatment and processing of milk only, the quantity of milk received being greater than 200 tonnes per day (average value on an annual basis)
Disposal or recycling of animal carcases or animal waste with a treatment capacity exceeding 10 tonnes per day
Intensive rearing of poultry with more than 40,000 places for poultry
Intensive rearing of pigs with more than 2,000 places for production pigs (over 30 kg)
Intensive rearing of pigs with more than 750 places for sows
Surface treatment of substances, objects or products using organic solvents, in particular for dressing, printing, coating, degreasing, waterproofing, sizing, painting, cleaning or impregnating, with an organic solvent consumption capacity of more than 150 kg per hour or more than 200 tonnes per year
Production of carbon (hard-burnt coal) or electrographite by means of incineration or graphitisation
Capture of CO2 streams from installations covered by Directive 2010/75/EU for the purposes of geological storage pursuant to Directive 2009/31/EC
Treatment and processing, other than exclusively packaging, of the following raw materials, whether previously processed or unprocessed, intended for the production of food or feed from animal and vegetable raw materials, both in combined and separate products, with a finished product production capacity in tonnes per day greater than 75 if A is equal to 10 or more or, [300- (22,5 � A)] in any other case, where �A� is the portion of animal material (in percent of weight) of the finished product production capacity
The facility is subject to Chapter II the IED.
The facility is not subject to Chapter II the IED.
List hosts the classification for the activities according to the Council Regulation 3037/90/EEC.
Growing of cereals except rice leguminous crops and oil seeds
List hosts the classification for the activities according to the Council Regulation 3037 90 EEC
Growing of vegetables and melons roots and tubers
Growing of tropical and subtropical fruits
Growing of other tree and bush fruits and nuts
Growing of spices aromatic drug and pharmaceutical crops
Support activities for animal production
Hunting trapping and related service activities
Silviculture and other forestry activities
Gathering of wild growing non-wood products
Quarrying of ornamental and building stone limestone gypsum chalk and slate
Operation of gravel and sand pits mining of clays and kaolin
Mining of chemical and fertiliser minerals
Support activities for petroleum and natural gas extraction
Support activities for other mining and quarrying
Processing and preserving of poultry meat
Production of meat and poultry meat products
Processing and preserving of fish crustaceans and molluscs
Manufacture of fruit and vegetable juice
Other processing and preserving of fruit and vegetables
Manufacture of margarine and similar edible fats
Manufacture of starches and starch products
Manufacture of bread manufacture of fresh pastry goods and cakes
Manufacture of rusks and biscuits manufacture of preserved pastry goods and cakes
Manufacture of macaroni noodles couscous and similar farinaceous products
Manufacture of cocoa chocolate and sugar confectionery
Manufacture of condiments and seasonings
Manufacture of prepared meals and dishes
Manufacture of homogenised food preparations and dietetic food
Manufacture of other food products n e c
Manufacture of prepared feeds for farm animals
Distilling rectifying and blending of spirits
Manufacture of cider and other fruit wines
Manufacture of other non-distilled fermented beverages
Manufacture of soft drinks production of mineral waters and other bottled waters
Preparation and spinning of textile fibres
Manufacture of knitted and crocheted fabrics
Manufacture of made-up textile articles except apparel
Manufacture of cordage rope twine and netting
Manufacture of non-wovens and articles made from non-wovens except apparel
Manufacture of other technical and industrial textiles
Manufacture of other wearing apparel and accessories
Manufacture of knitted and crocheted hosiery
Manufacture of other knitted and crocheted apparel
Tanning and dressing of leather dressing and dyeing of fur
Manufacture of luggage handbags and the like saddlery and harness
Manufacture of veneer sheets and wood-based panels
Manufacture of other builders carpentry and joinery
Manufacture of other products of wood manufacture of articles of cork straw and plaiting materials
Manufacture of corrugated paper and paperboard and of containers of paper and paperboard
Manufacture of household and sanitary goods and of toilet requisites
Manufacture of other articles of paper and paperboard
Manufacture of refined petroleum products
Manufacture of other inorganic basic chemicals
Manufacture of other organic basic chemicals
Manufacture of fertilisers and nitrogen compounds
Manufacture of plastics in primary forms
Manufacture of synthetic rubber in primary forms
Manufacture of pesticides and other agrochemical products
Manufacture of paints varnishes and similar coatings printing ink and mastics
Manufacture of soap and detergents cleaning and polishing preparations
Manufacture of perfumes and toilet preparations
Manufacture of other chemical products n e c
Manufacture of basic pharmaceutical products
Manufacture of pharmaceutical preparations
Manufacture of rubber tyres and tubes retreading and rebuilding of rubber tyres
Manufacture of plastic plates sheets tubes and profiles
Manufacture of builders’ ware of plastic
Manufacture and processing of other glass including technical glassware
Manufacture of bricks tiles and construction products in baked clay
Manufacture of ceramic household and ornamental articles
Manufacture of ceramic sanitary fixtures
Manufacture of ceramic insulators and insulating fittings
Manufacture of other technical ceramic products
Manufacture of concrete products for construction purposes
Manufacture of plaster products for construction purposes
Manufacture of other articles of concrete plaster and cement
Manufacture of other non-metallic mineral products n e c
Manufacture of basic iron and steel and of ferro-alloys
Manufacture of tubes pipes hollow profiles and related fittings of steel
Manufacture of metal structures and parts of structures
Manufacture of doors and windows of metal
Manufacture of central heating radiators and boilers
Manufacture of other tanks reservoirs and containers of metal
Manufacture of steam generators except central heating hot water boilers
Forging pressing stamping and roll-forming of metal powder metallurgy
Manufacture of steel drums and similar containers
Manufacture of wire products chain and springs
Manufacture of fasteners and screw machine products
Manufacture of other fabricated metal products n e c
Manufacture of computers and peripheral equipment
Manufacture of instruments and appliances for measuring testing and navigation
Manufacture of irradiation electromedical and electrotherapeutic equipment
Manufacture of optical instruments and photographic equipment
Manufacture of magnetic and optical media
Manufacture of electric motors generators and transformers
Manufacture of electricity distribution and control apparatus
Manufacture of batteries and accumulators
Manufacture of other electronic and electric wires and cables
Manufacture of electric lighting equipment
Manufacture of electric domestic appliances
Manufacture of non-electric domestic appliances
Manufacture of other electrical equipment
Manufacture of engines and turbines except aircraft vehicle and cycle engines
Manufacture of other pumps and compressors
Manufacture of bearings gears gearing and driving elements
Manufacture of ovens furnaces and furnace burners
Manufacture of lifting and handling equipment
Manufacture of office machinery and equipment except computers and peripheral equipment
Manufacture of non-domestic cooling and ventilation equipment
Manufacture of other general-purpose machinery n e c
Manufacture of agricultural and forestry machinery
Manufacture of machinery for mining quarrying and construction
Manufacture of machinery for food beverage and tobacco processing
Manufacture of machinery for textile apparel and leather production
Manufacture of machinery for paper and paperboard production
Manufacture of plastics and rubber machinery
Manufacture of other special-purpose machinery n e c
Manufacture of bodies coachwork for motor vehicles manufacture of trailers and semi-trailers
Manufacture of electrical and electronic equipment for motor vehicles
Manufacture of other parts and accessories for motor vehicles
Building of ships and floating structures
Manufacture of railway locomotives and rolling stock
Manufacture of air and spacecraft and related machinery
Manufacture of military fighting vehicles
Manufacture of bicycles and invalid carriages
Manufacture of other transport equipment n e c
Manufacture of office and shop furniture
Manufacture of jewellery, bijouterie and related articles
Manufacture of jewellery and related articles
Manufacture of imitation jewellery and related articles
Manufacture of medical and dental instruments and supplies
Repair of electronic and optical equipment
Repair and maintenance of ships and boats
Repair and maintenance of aircraft and spacecraft
Repair and maintenance of other transport equipment
Installation of industrial machinery and equipment
Distribution of gaseous fuels through mains
Treatment and disposal of non-hazardous waste
Treatment and disposal of hazardous waste
Remediation activities and other waste management services
Construction of residential and non-residential buildings
Construction of railways and underground railways
Construction of utility projects for fluids
Construction of utility projects for electricity and telecommunications
Construction of other civil engineering projects n e c
Plumbing heat and air-conditioning installation
Other specialised construction activities n e c
Maintenance and repair of motor vehicles
Wholesale trade of motor vehicle parts and accessories
Retail trade of motor vehicle parts and accessories
Sale maintenance and repair of motorcycles and related parts and accessories
Agents involved in the sale of agricultural raw materials live animals textile raw materials and semi-finished goods
Agents involved in the sale of fuels ores metals and industrial chemicals
Agents involved in the sale of timber and building materials
Agents involved in the sale of machinery industrial equipment ships and aircraft
Agents involved in the sale of furniture household goods hardware and ironmongery
Agents involved in the sale of textiles clothing fur footwear and leather goods
Agents involved in the sale of food beverages and tobacco
Agents specialised in the sale of other particular products
Agents involved in the sale of a variety of goods
Wholesale of grain unmanufactured tobacco seeds and animal feeds
Wholesale of dairy products eggs and edible oils and fats
Wholesale of sugar and chocolate and sugar confectionery
Wholesale of coffee tea cocoa and spices
Wholesale of other food including fish crustaceans and molluscs
Non-specialised wholesale of food beverages and tobacco
Wholesale of electrical household appliances
Wholesale of china and glassware and cleaning materials
Wholesale of furniture carpets and lighting equipment
Wholesale of computers computer peripheral equipment and software
Wholesale of electronic and telecommunications equipment and parts
Wholesale of agricultural machinery equipment and supplies
Wholesale of mining construction and civil engineering machinery
Wholesale of machinery for the textile industry and of sewing and knitting machines
Wholesale of other office machinery and equipment
Wholesale of other machinery and equipment
Wholesale of solid liquid and gaseous fuels and related products
Wholesale of wood construction materials and sanitary equipment
Wholesale of hardware plumbing and heating equipment and supplies
Wholesale of other intermediate products
Retail sale in non-specialised stores with food beverages or tobacco predominating
Other retail sale in non-specialised stores
Retail sale of fruit and vegetables in specialised stores
Retail sale of meat and meat products in specialised stores
Retail sale of fish crustaceans and molluscs in specialised stores
Retail sale of bread cakes flour confectionery and sugar confectionery in specialised stores
Retail sale of beverages in specialised stores
Retail sale of tobacco products in specialised stores
Other retail sale of food in specialised stores
Retail sale of automotive fuel in specialised stores
Retail sale of computers peripheral units and software in specialised stores
Retail sale of telecommunications equipment in specialised stores
Retail sale of audio and video equipment in specialised stores
Retail sale of textiles in specialised stores
Retail sale of hardware paints and glass in specialised stores
Retail sale of carpets rugs wall and floor coverings in specialised stores
Retail sale of electrical household appliances in specialised stores
Retail sale of furniture lighting equipment and other household articles in specialised stores
Retail sale of books in specialised stores
Retail sale of newspapers and stationery in specialised stores
Retail sale of music and video recordings in specialised stores
Retail sale of sporting equipment in specialised stores
Retail sale of games and toys in specialised stores
Retail sale of clothing in specialised stores
Retail sale of footwear and leather goods in specialised stores
Dispensing chemist in specialised stores
Retail sale of medical and orthopaedic goods in specialised stores
Retail sale of cosmetic and toilet articles in specialised stores
Retail sale of flowers plants seeds fertilisers pet animals and pet food in specialised stores
Retail sale of watches and jewellery in specialised stores
Other retail sale of new goods in specialised stores
Retail sale of second-hand goods in stores
Retail sale via stalls and markets of food beverages and tobacco products
Retail sale via stalls and markets of textiles clothing and footwear
Retail sale via stalls and markets of other goods
Retail sale via mail order houses or via Internet
Other retail sale not in stores stalls or markets
Urban and suburban passenger land transport
Sea and coastal passenger water transport
Service activities incidental to land transportation
Service activities incidental to water transportation
Service activities incidental to air transportation
Postal activities under universal service obligation
Holiday and other short-stay accommodation
Camping grounds recreational vehicle parks and trailer parks
Restaurants and mobile food service activities
Publishing of directories and mailing lists
Motion picture video and television programme production activities
Motion picture video and television programme post-production activities
Motion picture video and television programme distribution activities
Sound recording and music publishing activities
Television programming and broadcasting activities
Computer facilities management activities
Other information technology and computer service activities
Data processing hosting and related activities
Other information service activities n e c
Trusts funds and similar financial entities
Other financial service activities except insurance and pension funding n e c
Security and commodity contracts brokerage
Other activities auxiliary to financial services except insurance and pension funding
Activities of insurance agents and brokers
Other activities auxiliary to insurance and pension funding
Renting and operating of own or leased real estate
Management of real estate on a fee or contract basis
Accounting bookkeeping and auditing activities tax consultancy
Public relations and communication activities
Business and other management consultancy activities
Engineering activities and related technical consultancy
Research and experimental development on biotechnology
Other research and experimental development on natural sciences and engineering
Research and experimental development on social sciences and humanities
Market research and public opinion polling
Translation and interpretation activities
Other professional scientific and technical activities n e c
Renting and leasing of cars and light motor vehicles
Renting and leasing of recreational and sports goods
Renting and leasing of other personal and household goods
Renting and leasing of agricultural machinery and equipment
Renting and leasing of construction and civil engineering machinery and equipment
Renting and leasing of office machinery and equipment including computers
Renting and leasing of water transport equipment
Renting and leasing of air transport equipment
Renting and leasing of other machinery equipment and tangible goods n e c
Leasing of intellectual property and similar products except copyrighted works
Activities of employment placement agencies
Other reservation service and related activities
Other building and industrial cleaning activities
Combined office administrative service activities
Photocopying document preparation and other specialised office support activities
Organisation of conventions and trade shows
Activities of collection agencies and credit bureaus
Other business support service activities n e c
General public administration activities
Regulation of the activities of providing health care education cultural services and other social services excluding social security
Regulation of and contribution to more efficient operation of businesses
Technical and vocational secondary education
Residential care activities for mental retardation mental health and substance abuse
Residential care activities for the elderly and disabled
Social work activities without accommodation for the elderly and disabled
Other social work activities without accommodation n e c
Operation of historical sites and buildings and similar visitor attractions
Botanical and zoological gardens and nature reserves activities
Activities of amusement parks and theme parks
Other amusement and recreation activities
Activities of business and employers membership organisations
Activities of professional membership organisations
Activities of other membership organisations n e c
Repair of computers and peripheral equipment
Repair of household appliances and home and garden equipment
Repair of furniture and home furnishings
Repair of other personal and household goods
Washing and dry- cleaning of textile and fur products
Activities of households as employers of domestic personnel
Undifferentiated goods- and services-producing activities of private households for own use
Undifferentiated goods-producing activities of private households for own use
Undifferentiated service-producing activities of private households for own use
Activities of extraterritorial organisations and bodies
A combustion plant as defined in Chapter III of Directive 2010/75/EU
Plant covered by Directive 2010/75/EU, Chapter IV, incinerating waste
Plant covered by Directive 2010/75/EU, Chapter IV, co-incinerating waste
This code list contains the potential options under which a confidentiality claim for data can be made.
Disclosure of the information would adversely affect the confidentiality of the proceedings of public authorities, where such confidentiality is provided for by law, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect international relations, public security or national defence, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect international relations, public security or national defense, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect the course of justice, the ability of any person to receive a fair trial or the ability of a public authority to conduct an enquiry of a criminal or disciplinary nature, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect the confidentiality of commercial or industrial information where such confidentiality is provided for by national or Community law to protect a legitimate economic interest, including the public interest in maintaining statistical confidentiality and tax secrecy, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect intellectual property rights, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect the confidentiality of personal data and/or files relating to a natural person where that person has not consented to the disclosure of the information to the public, where such confidentiality is provided for by national or Community law, in accordance with Directive 2003/4/EC.
Disclosure of the information would adversely affect the interests or protection of any person who supplied the information requested on a voluntary basis without being under, or capable of being put under, a legal obligation to do so, unless that person has consented to the release of the information concerned, in accordance with DIRECTIVE 2003/4/EC.
Disclosure of the information would adversely affect the protection of the environment to which such information relates, such as the location of rare species, according to DIRECTIVE 2003/4/EC.
This code list contains details of the Chapters of Directive 2010/75/EU which may be selected by Member States as part of their EU Registry data reporting
Special provisions for Combustion Plants
Chapter IV - waste incineration and co-incineration plants
Special provisions for waste incineration plants and waste co-incineration plant
Chapter V - installations and activities using organic solvents
Special provisions for installations and activities using organic solvents
ChapterVI - installations producing titanium dioxide
Special provisions for installations producing titanium dioxide