CDR QaQc Birds Directive Article 12 Reporting
Please check the look up table lu_bird_species.
The combination species code/EURING code should exist in the look up table lu_bird_species.
The combination species code/scientific name should exist in the look up table lu_bird_species.
The combination species code/ subspecific population should exist in the the look up table lu_bird_species.
The combination species code/ subspecific population should exist in the look up table lu_bird_species.
Please check the vocabulary seasonArt12.
Information on Season is expected for all reports.
Year1 should be lower or equal than year2.
Please check the vocabulary populationUnits.
The reported population unit differs with the recommended unit in the checklist on the reference portal.
The reported population unit differs with the recommended unit in the reported checklist.
Population size unit (2.2a) cannot be empty when Population size (2.2b,c,d) is provided.
Population size unit should be provided.
Numeric field, only integers greater or equal 0 are permitted.
2.2c Population size - max should be greater or equal min.
Population size should be provided as interval (2.2b,c) and/or best single value (2.2d). When only a minimum (or maximum) estimate of population size is available (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(b) Minimum' or '(c) Maximum' fields.
Please check the vocabulary typeEstimate.
Type of estimate was provided although there is no entry for population size (2.2b,c,d). Check coherence between these two fields. If both interval (2.2b 'Minimum' and 2.2c 'Maximum') and a best single value (2.2d 'Best single value') are provided, field 2.3 'Type of estimate' should correspond to the more accurate estimate. This should be noted in 2.7 'Additional information'.
The type of estimate for population size should be provided.
Please check the vocabulary methodsUsed.
2.3 Type of estimate should be empty when Population size Method used is 'AbsentData - Insufficient or no data available'. When the method is assessed as 'AbsentData - Insufficient or no data available', the type of estimate used for the population size cannot be defined. If you want to report an estimate based on a method using limited data, please select 'estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
The method should be provided. In case the information to be reported in this section is not available use 'AbsentData - Insufficient or no data available'.
Please check the vocabulary reasonChange.
If 'noChange' is selected, there is no need to explain the nature of change.
Only one main reason is expected and should be part of the reported reasons.
Indicate if there is any change since the previous reporting period (2008 - 2012) in the population size reported. Report 'noChange' if the answer to the question: 'Is there a change between reporting periods?' is 'No'. Provide the nature of that change (more than one option can be chosen) if the answer is 'Yes'.
Trend should be provided. In case the information to be reported in this section is not available use 'Unk - unknown'.
Numeric field, only decimals are permitted.
3.1.3b Short-term trend Magnitude - max should be greater or equal min.
Short term trend magnitude should be provided as interval (3.1.3a, b) and/or single value (3.1.3c). When only a minimum (or maximum) value of magnitude is known (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(a) Minimum' or '(b) Maximum' fields.
Inconsistent values provided in fields 3.1.2 Short-term trend Direction and 3.1.4 Short-term trend Method used. When the method is assessed as 'AbsentData - Insufficient or no data available', the trend cannot be defined. If you want to report a trend as stable, increasing or decreasing based on a method using limited data, please select'?estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
3.2.3b Long-term trend Magnitude - max should be greater or equal min.
Long term trend magnitude should be provided as interval (3.2.3a, b) and/or single value (3.2.3c). When only a minimum (or maximum) value of magnitude is known (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(a) Minimum' or '(b) Maximum' fields.
Inconsistent values provided in fields 3.2.2 Long-term trend Direction and 3.2.4 Long-term trend Method used. When the method is assessed as 'AbsentData - Insufficient or no data available', the trend cannot be defined. If you want to report a trend as stable, increasing or decreasing based on a method using limited data, please select'?estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
Indicate whether information on species distribution is sensitive.
Numeric field, only decimals greater or equal 0 is permitted.
Breeding distribution surface area should be provided.
Method should be provided. In case the information to be reported in this section is not available use 'AbsentData - Insufficient or no data available'.
5.1.3b Short-term trend Magnitude - max should be greater or equal min.
Short term trend magnitude should be provided as interval (5.1.3a, b) and/or single value (5.1.3c). When only a minimum (or maximum) value of magnitude is known (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(a) Minimum' or '(b) Maximum' fields.
Inconsistent values provided in fields 5.1.2 Short-term trend Direction and 5.1.4 Short-term trend Method used. When the method is assessed as 'AbsentData - Insufficient or no data available', the trend cannot be defined. If you want to report a trend as stable, increasing or decreasing based on a method using limited data, please select'?estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
5.2.3b Long-term trend Magnitude - max should be greater or equal min.
Long term trend magnitude should be provided as interval (5.2.3a, b) and/or single value (5.2.3c). When only a minimum (or maximum) value of magnitude is known (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(a) Minimum' or '(b) Maximum' fields.
Inconsistent values provided in fields 5.2.2 Long-term trend Direction and 5.2.4 Long-term trend Method used. When the method is assessed as 'AbsentData - Insufficient or no data available', the trend cannot be defined. If you want to report a trend as stable, increasing or decreasing based on a method using limited data, please select'?estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
Please check the vocabulary typeOfPlan .
The reported type of international plan differs with the one specified in the look up table linkage_species_plans.
Information on Type of international plan is expected for all reports. In case there is no international plan ue 'NA - No plan'.
Indicate whether a national plan linked to the international one has been adopted.
Description of measures or initiatives is not expected if a national plan linked to the international one has been adopted (6.2 is 'Yes').
Description of measures or initiatives is expected if a national plan linked to the international one has not been adopted (6.2 is 'No').
Please check the vocabulary effectivenessSAPs.
Please check the vocabulary effectivenessMPs.
More entries than permitted. Maximum of 10 pressures per report.
More entries than permitted. Maximum of 10 threats per report.
More entries than permitted. Maximum of 5 pressures with 'H - High importance' per report.
More entries than permitted. Maximum of 5 threats with 'H - High importance' per report.
Code 'Xu - Unknown pressure', 'Xp - No information on pressures ' or 'Xxp - No pressures ' should be reported as a pressure, not as a threat.
Code 'Xt - No information on threats' or 'Xxt - No threats ' should be reported as a threat, not as a pressure.
Code 'Xt - No information on threats' used but other threats listed.
Code 'Xp - No information on pressures' used but other pressures listed.
The list of pressures and/or threats should be provided. Report 'Xp - No information on pressures' and/or 'Xt - No information on threats' for missing information.
The list of threats should be provided. Report 'Xt - No information on threats' for missing information.
The list of pressures should be provided. Report 'Xp - No information on pressures' for missing information.
Ranking is provided although no code indicated for pressure and/or threat.
This field cannot be empty unless the reported code is 'Xp', 'Xt', 'Xu', 'Xxp' or 'Xxt'.
Please check the vocabulary pressuresThreatsLocation .
Location is provided although no code indicated for pressure and/or threat.
This field cannot be empty unless the reported code is 'Xp', 'Xt', 'Xu', 'Xxp' or 'Xxt'. Report 'unk - unknown' if needed.
Code should be 'p' = pressure or 't' = threat.
Type of pressure/threat is provided although no code indicated for pressure and/or threat.
The type of pressure or threats should be systematically provided. Code should be 'p' = pressure or 't' = threat.
Indicate whether measures are needed or not.
Status of measures is not expected if no measures are needed.
Please check the vocabulary measuresIdentified.
Status of measures should be provided if measures are needed.
The main purpose of measures taken is not expected if no measures are identified and taken.
Please check the vocabulary measuresPurposeBirds.
The main purpose of measures taken is expected if measures are identified and taken.
Location of measures is not expected if no measures identified and taken.
Please check the vocabulary measuresLocation.
The location of the measures is expected if measures are identified and taken.
Time frame of response to measures is not expected if no measures are identified and taken.
Please check the vocabulary measuresResponse.
The time frame of the response to measures should be provided if measures are identified and taken.
More entries than permitted. Maximum of 10 measures per biogeographical assessment.
The list of measures should be provided if measures are identified and taken.
The reported population size unit within Natura 2000 network differs with the reporting unit used in 2.2.
Population size unit within Natura 2000 network (9.1a) cannot be empty when Population size within within Natura 2000 network (9.1b,c,d) is provided.
Population size unit within Natura 2000 network should be provided.
9.1c Population size within Natura 2000 network - max should be greater or equal min.
Population size within Natura 2000 network should be provided as interval (9.1b, c) and/or best single value (9.1d) for annex I species and non-annex I species triggering SPA classification. When only a minimum (or maximum) estimation of population size is available (e.g. through expert opinion) this should be entered in the 'Best single value' field and NOT the '(b) Minimum' or '(c) Maximum' fields.
Incoherent information provided. Type of estimate was provided although there is no entry for population size within Natura 2000 network (9.1b,c,d). Check coherence between these two fields. If both interval (9.1b 'Minimum' and 9.1c 'Maximum') and a best single value (9.1d 'Best single value') are provided, field 9.2 'Type of estimate' should correspond to the more accurate estimate. This should be noted in 9.6 'Additional information'.
The type of estimate for the population size within Natura 2000 network should be provided.
9.2 Type of estimate should be empty when Population size inside the network Method used is 'AbsentData - Insufficient or no data available'. When the method is assessed as 'AbsentData - Insufficient or no data available', the type of estimate used for the population size cannot be defined. If you want to report an estimate based on a method using limited data, please select 'estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
The Trend should be provided. In case the information to be reported in this section is not available use 'Unk - unknown'.
Inconsistent values provided in fields 9.4 Short-term trend Direction and 9.5 Short-term trend Method used. When the method is assessed as 'AbsentData - Insufficient or no data available', the trend cannot be defined. If you want to report a trend as stable, increasing or decreasing based on a method using limited data, please select'?estimateExpert - Based mainly on expert opinion with very limited data' for the method used.
This section is to report on Annex II species only.
Indicate whether this Annex II species is nationally hunted. Report 'No' if the answer to the question: 'Is the species nationally hunted' is 'No'.
The reported unit for hunting bag differs with the recommended unit 'i - number of individuals' defined in the reporting format.
Population unit for hunting bag should be provided.
Min/max value should be provided systematically for all seasons.
Min/max value should be provided systematically for all seasons. Report '0' if no hunting bag or there was a temporary ban.
Only min/max or unknown value is expected for 10.2b1 Statistics/quantity per hunting season or year over the reporting period 'Season/year1'.
Statistics/quantity per hunting season or year over the reporting period 'Season/year1' should be provided (10.2b1min, 10.2b1max, 10.2b1x).
Numeric field, only decimals greater or equal 0 are permitted.
10.2b1max Statistics/quantity on season/year 1- max should be greater or equal min.
This field cannot be empty. Code should be 'Yes' or 'No'.
Only min/max or unknown value is expected for 10.2b2 Statistics/quantity per hunting season or year over the reporting period 'Season/year2'.
Statistics/quantity per hunting season or year over the reporting period 'Season/year2' should be provided (10.2b2min, 10.2b2max, 10.2b2x).
10.2b2max Statistics/quantity on season/year 2- max should be greater or equal min.
Only min/max or unknown value is expected for 10.2b3 Statistics/quantity per hunting season or year over the reporting period 'Season/year3'.
Statistics/quantity per hunting season or year over the reporting period 'Season/year3' should be provided (10.2b3min, 10.2b3max, 10.2b3x).
10.2b3max Statistics/quantity on season/year 3 - max should be greater or equal min.
Only min/max or unknown value is expected for 10.2b4 Statistics/quantity per hunting season or year over the reporting period 'Season/year4'.
M Statistics/quantity per hunting season or year over the reporting period 'Season/year4' should be provided (10.2b4min, 10.2b4max, 10.2b4x).
10.2b4max Statistics/quantity on season/year 4 - max should be greater or equal min.
Only min/max or unknown value is expected for 10.2b5 Statistics/quantity per hunting season or year over the reporting period 'Season/year5'.
Statistics/quantity per hunting season or year over the reporting period 'Season/year5' should be provided (10.2b5min, 10.2b5max, 10.2b5x).
10.2b5max Statistics/quantity on season/year 5 - max should be greater or equal min.
Only min/max or unknown value is expected for 10.2b6 Statistics/quantity per hunting season or year over the reporting period 'Season/year6'.
Statistics/quantity per hunting season or year over the reporting period 'Season/year6' should be provided (10.2b6min, 10.2b6max, 10.2b6x).
10.2b6max Statistics/quantity on season/year 6 - max should be greater or equal min.
This section is to report on the species' national status in relation to objectives outlined in the SAPs/BMSs.
Information on the species' national status in relation to objectives outlined in the SAPs/BMSs should be provided.
This section is to report on the status of huntable species in non-Secure status, in relation to objectives outlined in the MPs.
Information on the status of huntable species in non-Secure status, in relation to objectives outlined in the MPs should be provided.
Indicate whether information related to international plans is provided for the other season.
Indicate whether information related to Annex II species is provided for the other season.
The best single value (2.2d) should not be less than the minimum (2.2b) or higher than the maximum (2.2c).
The best single value (9.1d) should not be less than the minimum (9.1b) or higher than the maximum (9.1c).
The trend direction is reported as 'D - decreasing'. At least one of the min, max or best single value should be negative.
Information on main achievements under the Birds Directive during the reporting period is expected.
Information related to the Birds Directive is expected.
General information on the network of SPAs is expected.
General information on monitoring is expected.
General information on species protection is expected.
General information on transposition of the Directive is expected.
The number of marine SPAs cannot be higher than the total number of SPAs.
The total number of SPAs should be provided.
The surface area of terrestrial SPAs cannot be higher than the surface area of all SPAs.
The surface area of marine SPAs cannot be higher than the surface area of all SPAs.
The surface area of terrestrial SPAs plus the surface area of marine SPAs together should give the surface area of all SPAs.
The surface area of all SPAs should be provided.
The surface area of terrestrial SPAs should be provided.
The total number of marine SPAs should be provided.
The surface area of marine SPAs should be provided.
The date of the last database delivered during the reporting period (2013 - 2018) is expected. Supply this information in the [DD]-MM-YYYY format.
The total number of SPAs for which necessary conservation measures have been established should be provided.
The proportion of the network area for which necessary conservation measures have been established should be between 0 and 100 %.
The proportion of the network area for which necessary conservation measures have been established should be provided.
The total number of SPAs for which a comprehensive management plan or a similar instrument is in place should be provided.
The proportion of the network area for which a comprehensive management plan or a similar instrument is in place should be between 0 and 100 %.
The proportion of the network area for which a comprehensive management plan or a similar instrument is in place should be provided.
The site code should contain 9 characters (letters and numbers).
The site name should be provided in addition to the sitecode.
The title of project/plan should be provided.
The year when Commission was informed about compensatory measures should be provided.
The year when project/plan was started to be implemented should be provided.
The year of publication should be provided.
Web-link and/or bibliographic reference should be provided.
Main contents of legal decision for introduction should be provided.
The date of consultation with the Commission should be provided.